ESP32-S3

syamei0·Y.maku·kicad/ESP32-S3/ESP32-S3.kicad_pcb

ESP32-S3 PCB layout, top view — open source ESP32 board by syamei0

About the ESP32-S3 PCB

ESP32-S3 is an open source ESP32 PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 95 × 72 mm, with 142 components from 25 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM1117DT-3.3 and CH217K. By type, the board carries 57 resistors, 38 diodes, 32 connectors, 7 capacitors, 3 ICs and 3 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

ESP32-S3, from the project README
From the project README

Main components on the ESP32-S3

ESP32-S3 bill of materials (BOM)

142 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
LM1117DT-3.3
LM1117GS-3.3
U2
1
CH217K
U3
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J6
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J7
2
RJ45_SHIELDED
RJ45_Shielded
J8, J33
13
CONN_01X03_SOCKET
Conn_01x03_Socket
J9, J10, J11, J14, J15, J17, J24, J25 +5
2
Jumper_pin
J13, J16
2
CONN_01X05_SOCKET
Conn_01x05_Socket
J18, J19
4
~
J20, J21, J22, J23
6
Conn_01x04_Pin
J27, J35, J36, J37, J38, J39
1
~
ATA6561
1
Speaker
LS1
2
SW_Push
SW1, SW3
1
SW_Push_DPDT
SW2
38
LED
D1, D2, D3, D4, D5, D6, D7, D8 +30
5
0.1μF
C1, C3, C4, C5, C6
1
22μF
C2
1
220UF
220uf
C7
Show 5 more
QtyPartRefs
1
22kΩ
R1
52
10kΩ
R2, R3, R6, R7, R8, R11, R12, R14 +44
1
120Ω
R4
2
5.1kΩ
R5, R9
1
240Ω
R17

ESP32-S3 design files

The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.

ESP32-S3: common questions

What microcontroller does the ESP32-S3 use?

The ESP32-S3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ESP32-S3 PCB?

The ESP32-S3 measures 95 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-S3?

142 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-S3 design files?

From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-S3 design in my own project?

The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-S3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Y.maku

Similar boards