6 open source boards using the MB85RQ8MX
Real designs built with the MB85RQ8MX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
FlightModule
tokai-student-rocket-project
90 × 70 mm70 parts2LNo license0RP2040/RP2350
ValveControlModule
tokai-student-rocket-project
90 × 70 mm48 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0STM32
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm52 parts2LMIT2AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0
The MB85RQ8MX in open source designs
The gallery holds 6 open source boards using the MB85RQ8MX from 2 GitHub repositories; a typical one measures about 90 × 70 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is THRValveControlModule by tokai-student-rocket-project.
Microcontrollers on boards using the MB85RQ8MX
MB85RQ8MX: common questions
Where can I find a MB85RQ8MX reference design?
Each of the 6 boards on this page is a real design using the MB85RQ8MX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MB85RQ8MX?
The ADXL375, ATA6561, ICM_42688, MAX485E and SC8721 appear in the most repositories here.
Which microcontrollers do boards using the MB85RQ8MX use?
Most are built on AVR/Arduino (2), Renesas (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MB85RQ8MX?
The median is 90 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the MB85RQ8MX?
By GitHub stars, THRValveControlModule by tokai-student-rocket-project, with 2 stars.
Can I simulate one of these boards using the MB85RQ8MX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.