NQSAP-PCB Flags and Jump Control
About the NQSAP-PCB Flags and Jump Control
NQSAP-PCB Flags and Jump Control is an open source PCB design by TomNisbet, published on GitHub under the MIT license. It is a 2-layer board measuring 102 × 96 mm, with 29 components from 17 distinct parts.
Other key parts include the 74HCT157, 74HCT74, 74HCT151, 74HCT245 and 74HCT08. By type, the board carries 7 ICs, 7 capacitors, 6 resistors, 5 diodes and 4 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
NQSAP 8-bit computer PCB version
A multi-PCB version of the NQSAP 8-bit computer
Visit the NQSAP-PCB documentation pages for detailed design notes and schematics.
Main components on the NQSAP-PCB Flags and Jump Control
NQSAP-PCB Flags and Jump Control bill of materials (BOM)
29 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT157 | DIP-16_W7.62mm | U1 |
| 2 | 74HCT74 | DIP-14_W7.62mm | U2, U3 |
| 1 | 74HCT151 | DIP-16_W7.62mm | U4 |
| 1 | 74HCT245 | DIP-20_W7.62mm | U5 |
| 1 | 74HCT08 | DIP-14_W7.62mm | U6 |
| 1 | 74HCT02 | DIP-14_W7.62mm | U7 |
| 2 | Bus | PinHeader_1x40_P2.54mm_Vertical | J1, J2 |
| 2 | IC-TL | PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 1 | C | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Z | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | V | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | N | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | JUMP | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 7 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7 |
| 4 | R_YEL | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 1 | R_RED | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
NQSAP-PCB Flags and Jump Control design files
The KiCad project lives in the TomNisbet/nqsap-pcb repository on GitHub; these links point at the commit this page was built from.
NQSAP-PCB Flags and Jump Control: common questions
How big is the NQSAP-PCB Flags and Jump Control?
The NQSAP-PCB Flags and Jump Control measures 102 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NQSAP-PCB Flags and Jump Control?
29 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the NQSAP-PCB Flags and Jump Control design files?
From the TomNisbet/nqsap-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the NQSAP-PCB Flags and Jump Control design in my own project?
Yes, under the terms of its MIT license, which TomNisbet chose for the repository.
More boards in nqsap-pcb
NQSAP-PCB Program Counter and Stack Pointer
102 × 96 mm65 parts2LMIT18
Ab register
102 × 96 mm60 parts2LMIT18
Xy register
102 × 96 mm60 parts2LMIT18
Microcode
102 × 96 mm59 parts2LMIT18
D register
102 × 96 mm52 parts2LMIT18
NQSAP-PCB Instruction Register and Ring Counter
102 × 96 mm52 parts2LMIT18
Backplane
360 × 128 mm42 parts2LMIT18
AVR/ArduinoNQSAP Loader / Debugger and Clock
102 × 96 mm42 parts2LMIT18
Alu
102 × 96 mm40 parts2LMIT18
NQSAP-PCB RAM and MAR
102 × 96 mm40 parts2LMIT18
AVR/ArduinoNQSAP Output Display
102 × 96 mm18 parts2LMIT18
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979