6 open source boards using the 74HCT151

Real designs built with the 74HCT151, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74HCT151

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT151 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 6 is left unconnected on 3 of 5 designs (a signal on 2).
  • Pin 8 is tied to GND on 3 of 5 designs (a signal on 2).
  • Pin 16 is tied to 5V on 3 of 5 designs (a signal on 2).
  • Pin 8 has a series capacitor on 2 of 5 designs, most often 100 nF.
Pin 6Connected to: Not connected 60% · a signal 40%
Pin 8Connected to: GND 60% · a signal 40%
  • Series capacitor on 40% · 100 nF (12)
Pin 16Connected to: 5V 60% · a signal 40%
  • Decoupling capacitor on 40% · 100 nF (2)
  • Capacitor on 40% · 100 nF (12)

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alu by TomNisbet, 2FISC by DoctorWkt, FISC by DoctorWkt and Rc2014 monitor by Hyiger-Designs.

The 74HCT151 in open source designs

The gallery holds 6 open source boards using the 74HCT151 from 5 GitHub repositories; a typical one measures about 158.3 × 96.3 mm and carries around 57 components.

83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Alu by TomNisbet.

What boards using the 74HCT151 are built for

74HCT151: common questions

Where can I find a 74HCT151 reference design?

Each of the 6 boards on this page is a real design using the 74HCT151. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HCT151 pin 6 connected?

Pin 6 is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT151.

How is the 74HCT151 pin 8 connected?

Pin 8 is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT151.

How is the 74HCT151 pin 16 connected?

Pin 16 is tied to 5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT151.

What parts are used alongside the 74HCT151?

The 74HCT74, 74HCT138, 74HCT161, 74HCT541 and 74HCT00 appear in the most repositories here.

How big is a typical board using the 74HCT151?

The median is 158.3 × 96.3 mm, and 83% are two-layer designs.

What is the most popular open source board using the 74HCT151?

By GitHub stars, Alu by TomNisbet, with 18 stars.

Can I simulate one of these boards using the 74HCT151 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part