HardLabs

Revopod1

tongtongwang86·Revolute·Hardware/revopod1/revopod1/revopod1.kicad_pcb

Revopod1 PCB layout, top view — open source AVR/Arduino board by tongtongwang86

About the Revopod1 PCB

Revopod1 is an open source AVR/Arduino PCB design by tongtongwang86, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 60 × 37 mm, with 53 components from 34 distinct parts.

Its main chip is the ATmega328-A, from the AVR/Arduino family. Other key parts include the BQ24075RGT, BQ27441-G1, MT3608, pogopins and FS312F-G. By type, the board carries 16 resistors, 13 diodes, 10 ICs, 8 capacitors, 2 transistors and 1 crystal.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

NRF52833 Based ScrollWheel Key

- Revolute currently simulate keyboard inputs, consumer controlls, mouse inputs.

- the actions and sensitivity of the wheel can be configured through the revolute configurator app that will be available for iOS, Macos and Windows devices that have bluetooth support.

- Configuratios done on revolute is persistently stored on device, which means that revolute can work on any device with Bluetooth and HID support.

Revopod1, from the project README
From the project README

Main components on the Revopod1

BQ24075RGTBQ27441-G1MT3608ATmega328-ApogopinsFS312F-Garduinnno pinnnnsA3144APE8865NR-19-HF-3

Revopod1 bill of materials (BOM)

53 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ24075RGT
U1
1
BQ27441-G1
U2
1
MT3608
U3
1
ATmega328-A
U4
1
pogopins
U5
1
FS312F-G
U6
1
arduinnno pinnnns
U7
1
A3144
U8
1
~
U9
1
APE8865NR-19-HF-3
U11
1
8205A
Q1
1
BSS84
Q2
1
16mhz
Y1
1
300mah
B1
1
SW_Push
SW1
1
LEDR
D1
1
LEDB
D2
1
SS34
D3
10
~
D4, D5, D6, D7, D8, D9, D10, D11 +2
1
22uH
L1
Show 14 more
QtyPartRefs
2
1uF
C1, C3
1
0.47uF
C2
1
4.7uF
C4
1
0.1u
C5
3
22uF
C6, C7, C8
1
0.01
R3
2
4.7k
R4, R5
3
10k
R6, R15, R19
2
1.1k
R7, R8
3
1k
R9, R10, R14
1
2k
R11
1
100
R12
1
7.5k
R13
2
22pF
R17, R18

Revopod1 design files

The KiCad project lives in the tongtongwang86/Revolute repository on GitHub; these links point at the commit this page was built from.

Revopod1: common questions

What microcontroller does the Revopod1 use?

The Revopod1 is built around the ATmega328-A, from the AVR/Arduino family.

How big is the Revopod1 PCB?

The Revopod1 measures 60 × 37 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Revopod1?

53 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Revopod1 design files?

From the tongtongwang86/Revolute repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Revopod1 design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Revopod1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Revolute

Similar boards