4 open source boards using the ADS122C04IPWR

Real designs built with the ADS122C04IPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ADS122C04IPWR in open source designs

The gallery holds 4 open source boards using the ADS122C04IPWR from 4 GitHub repositories; a typical one measures about 91.5 × 88 mm and carries around 101 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is QPCR-photosensing by hisashin.

Parts used alongside the ADS122C04IPWR

Microcontrollers on boards using the ADS122C04IPWR

What boards using the ADS122C04IPWR are built for

ADS122C04IPWR: common questions

Where can I find a ADS122C04IPWR reference design?

Each of the 4 boards on this page is a real design using the ADS122C04IPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADS122C04IPWR use?

Most are built on Raspberry Pi (1).

How big is a typical board using the ADS122C04IPWR?

The median is 91.5 × 88 mm, and 50% are two-layer designs.

What is the most popular open source board using the ADS122C04IPWR?

By GitHub stars, QPCR-photosensing by hisashin, with 47 stars.

Can I simulate one of these boards using the ADS122C04IPWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part