AHAQ-1

vactomas·AHAQ-1·PCB/AHAQ-1.kicad_pcb

AHAQ-1 PCB layout, top view — open source ESP32 board by vactomas

About the AHAQ-1 PCB

AHAQ-1 is an open source ESP32 PCB design by vactomas, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 58 components from 27 distinct parts.

Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the SCD41-D-R2, BMP280, TLV75533PDBV and USBLC6-2P6. By type, the board carries 30 capacitors, 7 ICs, 7 connectors, 7 resistors, 4 diodes and 1 transistor.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

# Air Quality Station

AHAQ-1 is an air quality station. Currently, it is an on-going project in development.

This device is based on the ESP32-C6 microcontroller. It features SCD4X CO2 sensor, BMP280 for temperature and ambient pressure measurements and SEN55 for PM1-10, NOx and VOCs. Additionaly, there are two I2C expansion ports for additional sensors. There is also a connector for E-Paper display.

Main components on the AHAQ-1

AHAQ-1 bill of materials (BOM)

58 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C6-MINI-1/U
U1
1
SCD41-D-R2
U2
1
BMP280
U3
3
TLV75533PDBV
U4, U5, U7
1
USBLC6-2P6
U6
1
SI1308EDL
Si1308EDL
Q1
1
32.768KHZ
32.768kHz
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
UART
J2
1
I2C_3
I2C_1
J3
1
SEN55
I2C_1
J4
1
I2C_1
SEN55
J5
1
I2C_2
FAN
J6
1
E-Paper
J9
1
D
D1
3
MBR0530
D2, D3, D4
1
68UH
68uH
L1
10
100NF
100nF
C1, C2, C3, C8, C12, C13, C25, C26 +2
11
1UF
1uF
C4, C5, C9, C15, C16, C17, C18, C19 +3
6
4.7UF
4.7uF
C6, C7, C14, C21, C22, C24
Show 7 more
QtyPartRefs
2
12PF
12pF
C10, C11
1
100NF
4.7uF
C30
2
5.1K
R5, R6
1
10M
R10
1
10K
R11
1
0.47R
R13
2
2.2K
R14, R15

AHAQ-1 design files

The KiCad project lives in the vactomas/AHAQ-1 repository on GitHub; these links point at the commit this page was built from.

AHAQ-1: common questions

What microcontroller does the AHAQ-1 use?

The AHAQ-1 is built around the ESP32-C6-MINI-1/U, from the ESP32 family.

How big is the AHAQ-1 PCB?

The AHAQ-1 measures 50 × 50 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the AHAQ-1?

58 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AHAQ-1 design files?

From the vactomas/AHAQ-1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AHAQ-1 design in my own project?

The repository has no license, so all rights stay with vactomas. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AHAQ-1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards