Processor Board 2025
Processor Board 2025 is an open source STM32 PCB design by waterloo-rocketry: a 4-layer, 48.9 × 52.1 mm board with 57 components (27 distinct parts). It is built around the MCP2562, INA180, TLV62568ADRLR, STM32H733VGTX and more. Filed under rf & radio.
Hardware monorepo avionics PCB
This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw repositories. The CAN driver library used is tracked in the canlib repository.
All hardware files were developed in KiCAD.
The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network…
Built around
Parts list
57 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2562 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | INA180 | SOT-23-5_HandSoldering | U2 |
| 1 | TLV62568ADRLR | DRL0006A | U3 |
| 1 | STM32H733VGTX STM32H733VGTx | LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | LSM6DSV32X | LGA-14L_2p5X3p0X0p86_STM | U5 |
| 1 | ASE-4.000MHZ-L-C-T | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | C20800 Polyfuse 1A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | BOOT_CTL | SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP3 |
| 1 | C7496845 LED_R | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | C7496843 LED_G | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | C434440 LED_B | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | C434434 PWR | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | PE-0603PFB121ST | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1 |
| 1 | DFE252012PD 1uH | IND_DFE252012PD-1R0M=P2_MUR | L1 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 11 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6, C7, C8, C9, C11, C13 +3 |
| 3 | 4.7UF 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C10, C22 |
| 1 | 22UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 3 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C14, C16 |
| 1 | 0.01UF 0.01uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2UF 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 1 | C912764 33 mR | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 453kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 150Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R8 |
| 2 | 330Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 14 | 10kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9, R10, R11, R12, R13, R14, R15 +6 |
More boards in canhw
STM32CanardBoard
100 × 70 mm244 parts6LGPL-3.014
STM32SRAD Altimeter
71.4 × 71.4 mm133 parts4LGPL-3.014
PICPropulsionBoard
56.9 × 61.3 mm99 parts2LGPL-3.014
PICRocket power board
33 × 58.4 mm79 parts4LGPL-3.014
PICRemote arming
68.9 × 41.5 mm61 parts4LGPL-3.014
STM32Camera
45.2 × 32.5 mm58 parts4LGPL-3.014
PICInjector sensor hub
58.4 × 45.7 mm58 parts2LGPL-3.014
PICCamera interface CAN board
38.6 × 29 mm44 parts4LGPL-3.014
STM32CAN relay
50 × 43.5 mm43 parts4LGPL-3.014
PICGPS Board
54.3 × 28.9 mm41 parts2LGPL-3.014
PICDAQ CAN support
86.4 × 35.1 mm31 parts2LGPL-3.014
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32Twonkie
dojoe
25.4 × 25.4 mm56 parts4LNo license415
STM32EEZ DIB MCU r1B1
eez-open
139 × 70 mm190 partsTAPR-OHL-1.0391
STM32EEZ DIB MCU r1B2
139 × 70 mm191 partsTAPR-OHL-1.0391
STM32VESC Controller
paltatech
160 × 90 mm336 parts4LNo license354
STM32${DOC TYPE} Document
EPFLXplore
69.7 × 76.7 mm253 parts6LApache-2.0345