Camera

waterloo-rocketry·canhw·camera/camera.kicad_pcb

Camera PCB layout, top view — open source STM32 board by waterloo-rocketry

About the Camera PCB

Camera is an open source STM32 PCB design by waterloo-rocketry, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 45.2 × 32.5 mm, with 58 components from 34 distinct parts.

Its main chip is the STM32H750VBTX, from the STM32 family. Other key parts include the INA180, TPS562200, LTC2875-S8 and MX25L25645GM2I-08G-TR. By type, the board carries 24 capacitors, 15 resistors, 5 ICs, 5 diodes, 4 connectors and 3 fuses.

It belongs with the rf & radio designs in this gallery.

From the project

Hardware monorepo avionics PCB

This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw repositories. The CAN driver library used is tracked in the canlib repository.

All hardware files were developed in KiCAD.

The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network…

Main components on the Camera

Camera bill of materials (BOM)

58 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
INA180
U1
1
TPS562200
U2
1
STM32H750VBTX
STM32H750VBTx
U4
1
LTC2875-S8
U5
1
MX25L25645GM2I-08G-TR
MX25L25645GM2I-08G
U8
1
ABM8G-32.000MHZ-B4Y-T
Y1
1
USB_B_Micro
J2
1
Programmer
J3
1
Micro_SD_Card
J5
1
G125-MH104M4-04AD000P
J6
1
PTC 250mA
F1
2
PTC 550mA
F2, F3
3
PMEG2010ER
D1, D2, D5
1
RED
D3
1
GREEN
D4
1
SRP5030T-3R3M
L1
11
100N
100n
C1, C4, C7, C11, C12, C13, C14, C15 +3
1
22U
22u
C2
2
33U
33u
C5, C6
2
2.2U
2.2u
C8, C9
Show 14 more
QtyPartRefs
1
4.7U
4.7u
C10
1
1u
C17
2
10P
10p
C19, C20
1
0.1U
0.1u
C21
1
10U
10u
C31
1
1UF
1uF
C49
1
0.1UF
0.1uF
C50
1
30MR
30mR
R1
1
40K
40k
R2
4
10K
10k
R3, R47, R48, R49
1
33.2k 1%
R4
1
10k 1%
R5
2
100R
R8, R9
5
47K
47k
R10, R11, R12, R13, R14

Camera design files

The KiCad project lives in the waterloo-rocketry/canhw repository on GitHub; these links point at the commit this page was built from.

Camera: common questions

What microcontroller does the Camera use?

The Camera is built around the STM32H750VBTX, from the STM32 family.

How big is the Camera PCB?

The Camera measures 45.2 × 32.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Camera?

58 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Camera design files?

From the waterloo-rocketry/canhw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Camera design in my own project?

Yes, under the terms of its GPL-3.0 license, which waterloo-rocketry chose for the repository.

Can I test firmware for the Camera without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in canhw

Similar boards