DAQ CAN support

waterloo-rocketry·canhw·DAQ CAN support/DAQ CAN support.kicad_pcb

DAQ CAN support PCB layout, top view — open source PIC board by waterloo-rocketry

About the DAQ CAN support PCB

DAQ CAN support is an open source PIC PCB design by waterloo-rocketry, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 86.4 × 35.1 mm, with 31 components from 28 distinct parts.

Its main chip is the M10578-A2, from the PIC family. Other key parts include the PIC18F26K83, MCP2562 and SPX3819M5-L-3-3. By type, the board carries 8 resistors, 5 capacitors, 4 ICs, 4 connectors, 4 diodes and 1 transistor.

It belongs with the rf & radio designs in this gallery.

From the project

Hardware monorepo avionics PCB

This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw repositories. The CAN driver library used is tracked in the canlib repository.

All hardware files were developed in KiCAD.

The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network…

Main components on the DAQ CAN support

DAQ CAN support bill of materials (BOM)

31 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
M10578-A2
PIC16F1455
U1
1
PIC18F26K83
MCP2515
U2
1
MCP2562
U3
1
SPX3819M5-L-3-3
USBLC6-2SC6
U4
1
DMN63D8LW-13
Q1
1
Screw_Terminal_01x04
J1
1
G125-MH104M4-04AD000P
USB_B
J2
1
Screw_Terminal_01x02
J3
1
Programming Header
J4
2
TestPoint
5V, 24V
1
0ZCM0008FF2G
350 mA PTC
F1
1
Jumper_2_Open
JP2
1
G5Q-1A
K1
2
Red
D1, D3
1
1N4148WX-TP
D2
1
KDZVTR3.6B
Red
D4
1
22PF
0.1u
C1
1
0.1UF
0.1u
C2
1
10UF
0.1u
C3
1
1UF
10u
C4
Show 8 more
QtyPartRefs
1
1UF
0.1u
C5
1
100R
330R
R1
2
10K
10k
R2, R3
1
10K
250R
R4
1
10k
R5
1
120R
R6
1
160
150R
R7
1
160
1.1k
R8

DAQ CAN support design files

The KiCad project lives in the waterloo-rocketry/canhw repository on GitHub; these links point at the commit this page was built from.

DAQ CAN support: common questions

What microcontroller does the DAQ CAN support use?

The DAQ CAN support is built around the M10578-A2, from the PIC family.

How big is the DAQ CAN support PCB?

The DAQ CAN support measures 86.4 × 35.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DAQ CAN support?

31 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DAQ CAN support design files?

From the waterloo-rocketry/canhw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DAQ CAN support design in my own project?

Yes, under the terms of its GPL-3.0 license, which waterloo-rocketry chose for the repository.

Can I test firmware for the DAQ CAN support without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in canhw

Similar boards