Remote arming

waterloo-rocketry·canhw·remote_arming/remote_arming.kicad_pcb

Remote arming PCB layout, top view — open source PIC board by waterloo-rocketry

About the Remote arming PCB

Remote arming is an open source PIC PCB design by waterloo-rocketry, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 68.9 × 41.5 mm, with 61 components from 41 distinct parts.

Its main chip is the PIC18F26K83, from the PIC family. Other key parts include the MCP2562, Mag Switch, UA78M05IDCYR and INA180. By type, the board carries 22 resistors, 11 capacitors, 6 ICs, 6 connectors, 4 transistors and 3 LEDs.

It belongs with the rf & radio designs in this gallery.

From the project

Hardware monorepo avionics PCB

This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw repositories. The CAN driver library used is tracked in the canlib repository.

All hardware files were developed in KiCAD.

The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network…

Main components on the Remote arming

Remote arming bill of materials (BOM)

61 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP2562
U1
1
PIC18F26K83
U2
1
Mag Switch
U3
1
UA78M05IDCYR
U4
2
INA180
U5, U6
2
BSS138
Q1, Q2
1
DMG2302UK
Q3
1
AOD417
Q4
1
ABM8G-12.000MHZ-18-D2Y-T
Y1
1
CONN_01X05_FEMALE
Conn_01x05_Female
J1
1
Battery 1
J2
1
CAN connector
J3
1
Altimeter Input
J4
1
SL Data Connector
J5
1
A1 Connections
J6
1
CMI-1295-0585T
BZ1
1
CMI-1295-1285T
BZ2
1
0603L025YR
F1
1
Polyfuse 350mA
F2
1
M1 Pull Up
JP1
Show 21 more
QtyPartRefs
1
D1 Pull Up
JP2
3
LED
DB1, DR1, DW1
2
CUS08F30
D1, D2
2
100NF
100nF
C1, C2
1
10UF
10uF
C3
1
0.1U
0.1u
C4
1
100N
100n
C5
1
0.33U
0.33u
C6
2
0.1UF
0.1uF
C7, C8
1
26PF
26pF
C9
1
26PF
26pF
C10
1
0.39UF
0.39uF
C11
9
10K
R1, R5, R7, R9, R16, R18, R20, R21 +1
3
330R
R2, R3, R4
4
27K
R6, R8, R17, R19
1
4MR
4mR
R10
1
200MR
200mR
R11
1
2k
R12
1
270R
R13
1
5k
R14
1
10KR
10kR
R15

Remote arming design files

The KiCad project lives in the waterloo-rocketry/canhw repository on GitHub; these links point at the commit this page was built from.

Remote arming: common questions

What microcontroller does the Remote arming use?

The Remote arming is built around the PIC18F26K83, from the PIC family.

How big is the Remote arming PCB?

The Remote arming measures 68.9 × 41.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Remote arming?

61 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Remote arming design files?

From the waterloo-rocketry/canhw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Remote arming design in my own project?

Yes, under the terms of its GPL-3.0 license, which waterloo-rocketry chose for the repository.

Can I test firmware for the Remote arming without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in canhw

Similar boards