Rocket power board

waterloo-rocketry·canhw·rocket_power_board/rocket_power_board.kicad_pcb

Rocket power board layout, top view — open source PIC board by waterloo-rocketry

About the Rocket power board

Rocket power board is an open source PIC PCB design by waterloo-rocketry, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 33 × 58.4 mm, with 79 components from 52 distinct parts.

Its main chip is the PIC18F26K83-I/SO, from the PIC family. Other key parts include the MCP2562, TPS259474ARPWR, INA180A3, OPA333AIDR and TPS563200. By type, the board carries 34 resistors, 23 capacitors, 8 ICs, 8 diodes, 3 connectors and 1 crystal.

It belongs with the rf & radio designs in this gallery.

From the project

Hardware monorepo avionics PCB

This repository tracks the hardware development for the RocketCAN project. All schematics, board designs, and fabrication files are tracked in this repository. The corresponding software running on each board can be found in the cansw repositories. The CAN driver library used is tracked in the canlib repository.

All hardware files were developed in KiCAD.

The RocketCAN project is an extension of the 2018 Flight Instrumentation project. The functions of the original Flight Instrumentation electronics are decoupled into several single-function modules connected by a Controller Area Network…

Main components on the Rocket power board

Rocket power board bill of materials (BOM)

79 components, 52 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP2562
U1
1
PIC18F26K83-I/SO
U2
2
TPS259474ARPWR
U3, U7
1
INA180A3
U4
2
OPA333AIDR
U5, U8
1
TPS563200
U6
1
ABM8G-12.000MHZ-18-D2Y-T
Y1
1
Programming Connector
J1
1
G125-MH104M4-04AD000P
J2
1
4DB-P108-02
J3
1
0154005.DRL
F1
1
RED
D1
1
BLUE
D2
1
WHITE
D3
1
PMEG3030EP
D4
1
SMF4L13CA
D5
1
SS24FL
D6
1
P4SMF5.0CA
D7
1
PMEG1020EH,115
D8
1
3.3UH
3.3uH
L1
Show 32 more
QtyPartRefs
4
10UF
10uF
C1, C13, C14, C15
1
0.1UF
0.1uF
C2
2
27PF
27pF
C3, C4
1
1UF
1uF
C5
2
2.2N
2.2n
C6, C17
1
100PF
100pF
C7
3
1.0UF
1.0uF
C8, C9, C21
3
0.1U
0.1u
C10, C11, C23
2
22UF
22uF
C12, C22
1
100NF
100nF
C16
1
100P
100p
C18
2
22UF
22uF
C19, C20
1
120R (DNP)
R1
1
220K
220k
R2
1
100K
100k
R3
7
10K
10k
R4, R6, R16, R19, R27, R30, R33
1
15K
15k
R5
1
500R
R7
2
330R
R8, R9
1
10MR
10mR
R10
1
470K
470k
R11
1
14.7K
14.7k
R12
3
50K
50k
R13, R23, R25
2
20K
20k
R14, R29
2
1.67K
1.67k
R15, R28
2
71.5K
71.5k
R17, R31
1
83.5K
83.5k
R18
3
1.5K
1.5k
R20, R21, R34
1
400K
400k
R22
1
180K
180k
R24
1
56.2K
56.2k
R26
1
30.5K
30.5k
R32

Rocket power board design files

The KiCad project lives in the waterloo-rocketry/canhw repository on GitHub; these links point at the commit this page was built from.

Rocket power board: common questions

What microcontroller does the Rocket power board use?

The Rocket power board is built around the PIC18F26K83-I/SO, from the PIC family.

How big is the Rocket power board?

The Rocket power board measures 33 × 58.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Rocket power board?

79 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rocket power board design files?

From the waterloo-rocketry/canhw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rocket power board design in my own project?

Yes, under the terms of its GPL-3.0 license, which waterloo-rocketry chose for the repository.

Can I test firmware for the Rocket power board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in canhw

Similar boards