22 open source boards using the RFX2401C

Real designs built with the RFX2401C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the RFX2401C

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the RFX2401C connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_16 pin has a decoupling capacitor on 11 of 13 designs, most often 1 µF (then 100 nF).
  • The DNC_13 pin is left unconnected on 13 of 13 designs.
  • The VDD_14 pin is left unconnected on 8 of 13 designs (3.3V on 5).
  • The TXEN_5 pin has a resistor to GND on 6 of 13 designs, most often 100 kΩ.
GND_1pin 1Connected to: GND 85% · not connected 15%
GND_2pin 2Connected to: GND 100%
GND_3pin 3Connected to: GND 100%
TXRX_4pin 4Connected to: Signal 100%
  • Capacitor to GND on 38% · 1 pF (4), 1.5 pF (1)
  • Series capacitor on 38% · 1.5 pF (4), 15 pF (1)
TXEN_5pin 5Connected to: LR1121IMLTRT 38%
  • Resistor to GND on 46% · 100 kΩ (6)
RXEN_6pin 6Connected to: LR1121IMLTRT 38%
  • Pull-up to 3.3V on 38% · 100 kΩ (5)
  • Series resistor on 31% · 1 kΩ (4)
GND_7pin 7Connected to: GND 85% · not connected 15%
GND_8pin 8Connected to: GND 100%
GND_9pin 9Connected to: GND 100%
ANT_10pin 10Connected to: Signal 100%
  • Series capacitor on 46% · 47 pF (6), 2.2 pF (1)
  • Capacitor to GND on 38% · 3 e-13F (4), 1.5 pF (3), 1.2 pF (1)
  • Inductor on 31% · 2.4 nH (3), 3 nH (1)
GND_11pin 11Connected to: GND 100%
GND_12pin 12Connected to: GND 85% · not connected 15%
DNC_13pin 13Connected to: Not connected 100%
VDD_14pin 14Connected to: Not connected 62% · 3.3V 38%
GND_15pin 15Connected to: GND 85% · not connected 15%
VDD_16pin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 1 µF (13), 100 nF (7), 220 pF (7)
EP_17pin 17Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dual radio pcb by AnyLeaf, OpenAIO by OpenDrone-hw, OpenRX-Gemini by OpenDrone-hw and OpenRX-Mono by OpenDrone-hw.

The RFX2401C in open source designs

The gallery holds 22 open source boards using the RFX2401C from 13 GitHub repositories; a typical one measures about 43.8 × 35 mm and carries around 85 components.

91% use four copper layers or more, and 73% carry an open source license.

The most starred is Dual radio pcb by AnyLeaf.

Microcontrollers on boards using the RFX2401C

RFX2401C: common questions

Where can I find a RFX2401C reference design?

Each of the 22 boards on this page is a real design using the RFX2401C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the RFX2401C VDD_16 pin?

The VDD_16 pin has a decoupling capacitor on 11 of 13 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the RFX2401C.

How is the RFX2401C DNC_13 pin connected?

The DNC_13 pin is left unconnected on 13 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the RFX2401C.

How is the RFX2401C VDD_14 pin connected?

The VDD_14 pin is left unconnected on 8 of 13 designs (3.3V on 5). Counted from the KiCad layouts of 13 open source designs using the RFX2401C.

What parts are used alongside the RFX2401C?

The LR1121IMLTRT, nRF24L01P, SKY13373-460LF, TLV75533PDQNR and ESP32-C3 appear in the most repositories here.

Which microcontrollers do boards using the RFX2401C use?

Most are built on ESP32 (16), RP2040/RP2350 (2), Nordic nRF (1) and STM32 (1).

How big is a typical board using the RFX2401C?

The median is 43.8 × 35 mm, and 9% are two-layer designs.

What is the most popular open source board using the RFX2401C?

By GitHub stars, Dual radio pcb by AnyLeaf, with 65 stars.

Can I simulate one of these boards using the RFX2401C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part