Heater
About the Heater PCB
Heater is an open source PCB design by zapta, published on GitHub. It is a 2-layer board measuring 90 × 88.4 mm, with 69 components from 26 distinct parts.
Other key parts include the OPA810IDBVT, D050505T-1WR4, LTC1966, TPS72325DBVR and ADS1115IDGS. By type, the board carries 32 capacitors, 19 resistors, 11 ICs, 5 diodes and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
A modular data acquisition system.
Backplane Proto board Controller board Power supply board
Main components on the Heater
Heater bill of materials (BOM)
69 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA810IDBVT | TSOT-23-5 | U1 |
| 1 | D050505T-1WR4 | D050505T-1WR4 | U2 |
| 2 | LTC1966 | MSOP-8_3x3mm_P0.65mm | U3, U6 |
| 1 | TPS72325DBVR | SOT-23-5 | U5 |
| 1 | ADS1115IDGS | VSSOP-10_3x3mm_P0.5mm | U8 |
| 1 | ISO1541 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 2 | ESD5344D-TP | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U11, U12 |
| 1 | XC6206P332MR | SOT-23-3 | U13 |
| 1 | TPS7A2025PDBVR | SOT-23-5 | U15 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | JST_VH_2_CHINESE | J1, J2 |
| 3 | C72043 GRN | LED_0603_1608Metric | D1, D2, D3 |
| 1 | C72038 YEL | LED_0603_1608Metric | D4 |
| 1 | C2286 RED | LED_0603_1608Metric | D5 |
| 20 | 100N 100n | C_0402_1005Metric | C1, C3, C4, C7, C8, C9, C10, C12 +12 |
| 10 | 10U 10u | C_0603_1608Metric | C2, C11, C15, C16, C21, C22, C25, C26 +2 |
| 2 | 2U2 2u2 | C_0805_2012Metric | C5, C6 |
| 1 | 0R025 | R_2512_6332Metric | R2 |
| 1 | 100K 100k | R_0402_1005Metric | R3 |
| 1 | 3K3 | R_0402_1005Metric | R4 |
| 2 | 5K1 10K | R_0402_1005Metric | R5, R7 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10K | R_0402_1005Metric | R6, R9, R12 |
| 5 | C17168 0R | R_0402_1005Metric | R8, R11, R13, R14, R19 |
| 1 | 1K | R_0402_1005Metric | R10 |
| 2 | 1K8 | R_0402_1005Metric | R21, R22 |
| 2 | 1K8 3K3 | R_0402_1005Metric | R23, R24 |
| 1 | 3K3 5K1 | R_0402_1005Metric | R25 |
Heater design files
The KiCad project lives in the zapta/daq repository on GitHub; these links point at the commit this page was built from.
Heater: common questions
How big is the Heater PCB?
The Heater measures 90 × 88.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Heater?
69 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Heater design files?
From the zapta/daq repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Heater design in my own project?
The repository has no license, so all rights stay with zapta. Use it as a reference, and ask the author before reusing the design.
More boards in daq
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k