6 open source boards using the NCP115AMX120TCG
Real designs built with the NCP115AMX120TCG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ReDIP-CIA
daglem
17.8 × 50.8 mm43 parts4LCERN-OHL-S-2.064RP2040/RP2350
Pico2-ice
tinyvision-ai-inc
27.9 × 63.5 mm97 parts4LMIT59RP2040/RP2350
Pico-Dev iCE
frohro
100 × 100 mm293 parts4LNo license2RP2040/RP2350
Pico2-ice
frohro
27.9 × 63.5 mm97 parts4LMIT0ESP8266
Arbolito
ZhengLinLei
73 × 66 mm64 parts2LCC-BY-NC-4.00Stigma gps board
tudsat-rocket
40 × 40 mm10 parts2LNo license0
How designs wire the NCP115AMX120TCG
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NCP115AMX120TCG connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 1.2V on 6 of 6 designs.
- The EN pin is tied to 3.3V on 6 of 6 designs.
- The IN pin is tied to 3.3V on 4 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 1.2V 100% | — |
| GNDpin 2, 5 | Connected to: GND 82% · 3.3V 18% |
|
| ENpin 3 | Connected to: 3.3V 100% | — |
| INpin 4 | Connected to: 3.3V 67% · not connected 17% · GND 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ReDIP-CIA by daglem, Pico2-ice by tinyvision-ai-inc, Pico-Dev iCE by frohro and Pico2-ice by frohro.
The NCP115AMX120TCG in open source designs
The gallery holds 6 open source boards using the NCP115AMX120TCG from 6 GitHub repositories; a typical one measures about 34 × 63.5 mm and carries around 81 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is ReDIP-CIA by daglem.
Parts used alongside the NCP115AMX120TCG
Microcontrollers on boards using the NCP115AMX120TCG
What boards using the NCP115AMX120TCG are built for
NCP115AMX120TCG: common questions
Where can I find a NCP115AMX120TCG reference design?
Each of the 6 boards on this page is a real design using the NCP115AMX120TCG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NCP115AMX120TCG OUT pin connected?
The OUT pin is tied to 1.2V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NCP115AMX120TCG.
How is the NCP115AMX120TCG EN pin connected?
The EN pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NCP115AMX120TCG.
How is the NCP115AMX120TCG IN pin connected?
The IN pin is tied to 3.3V on 4 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NCP115AMX120TCG.
What parts are used alongside the NCP115AMX120TCG?
The ICE40UP5K-SG48I, NCP115AMX330TCG, APS6404L-3SQN-SN, RP2350_80QFN and TL431DBZ appear in the most repositories here.
Which microcontrollers do boards using the NCP115AMX120TCG use?
Most are built on RP2040/RP2350 (3), ESP8266 (1) and FPGA (1).
How big is a typical board using the NCP115AMX120TCG?
The median is 34 × 63.5 mm, and 33% are two-layer designs.
What is the most popular open source board using the NCP115AMX120TCG?
By GitHub stars, ReDIP-CIA by daglem, with 64 stars.
Can I simulate one of these boards using the NCP115AMX120TCG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.