Nexus pear reva
aminewe898·nexus-pear-reva·hardware/kicad/nexus-pear-reva/nexus-pear-reva.kicad_pcb
About the Nexus pear reva PCB
Nexus pear reva is an open source ESP32 PCB design by aminewe898, published on GitHub. It is a 4-layer board measuring 100 × 90 mm, with 96 components from 53 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the USBLC6-2SC6, PESD5V0S2BT,215, TPS25940LRVCR, AP63203WU-7 and TXU0104PWR. By type, the board carries 45 resistors, 21 capacitors, 9 ICs, 8 connectors, 8 switches and 2 diodes.
It belongs with the audio designs in this gallery.
From the project
NEXUS PEAR Rev A hardware design, schematics, PCB, manufacturing review exports and engineering documentation
DO NOT ORDER — engineering review submission. Revised project: 2026-10-07.
ESP32-S3-WROOM-1U-N16R8, 16 MB flash/8 MB PSRAM, Waveshare 29318 IPS touch display (320 x 480 native / 480 x 320 landscape), two-point FT6336U, digital I2S microphone, stereo MAX98357A modules, 8-ohm speakers, optional microSD, real U.FL-to-RP-SMA external antenna, six ADC keys and bottom USB-C. Carrier 100 x 90 mm, four layers, no battery. Design peak allowance 11.54 W including 20% contingency and an enforced 0.75 W/channel audio cap; no measured peak is claimed.
Main components on the Nexus pear reva
Nexus pear reva bill of materials (BOM)
96 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 Espressif | ESP32-S3-WROOM-1U | U1 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U2 |
| 1 | PESD5V0S2BT,215 PESD5V0S2BT CC ESD Nexperia | SOT-23 | U3 |
| 1 | TPS25940LRVCR TPS25940LRVCR eFuse Texas Instruments | Texas_RVC0020A_WQFN-20-1EP_3x4mm_P0.5mm_EP1.6x2.6mm | U4 |
| 1 | AP63203WU-7 AP63203WU-7 3V3 buck Diodes Incorporated | TSOT-23-6 | U5 |
| 1 | TXU0104PWR TXU0104PWR fail-safe I2S Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | TUSB320LAIRWBR TUSB320LAIRWBR Type-C sink Texas Instruments | Texas_X2QFN-12_1.6x1.6mm_P0.4mm | U7 |
| 1 | TLV76033DBZR TLV76033DBZR always-on Texas Instruments | SOT-23 | U8 |
| 1 | SN74LVC2G02DCTR SN74LVC2G02DCTR dual NOR Texas Instruments | SSOP-8_2.95x2.8mm_P0.65mm | U9 |
| 1 | 2N7002,215 2N7002 eFuse inhibit Nexperia | SOT-23 | Q1 |
| 1 | USB4105-GF-A USB-C 5V / USB2 FS GCT | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | SM15B-GHS-TB(LF)(SN) WAVESHARE 29318 GH15 JST | JST_GH_SM15B-GHS-TB_1x15-1MP_P1.25mm_Horizontal | J2 |
| 1 | TSW-007-07-G-S LEFT AMP HARNESS Samtec | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | TSW-007-07-G-S RIGHT AMP HARNESS Samtec | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | TSW-006-07-G-S MIC HARNESS Samtec | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | TSW-006-07-G-S 3V3 SD HARNESS Samtec | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | TSW-006-07-G-S UART RECOVERY Samtec | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | TSW-004-07-G-S I2C EXPANSION Samtec | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | 1812L300/24SLER 3A / 24V PTC Littelfuse | Fuse_1812_4532Metric | F1 |
| 1 | B3F-1000 UP Omron | SW_PUSH_6mm | SW1 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B3F-1000 DOWN Omron | SW_PUSH_6mm | SW2 |
| 1 | B3F-1000 LEFT Omron | SW_PUSH_6mm | SW3 |
| 1 | B3F-1000 RIGHT Omron | SW_PUSH_6mm | SW4 |
| 1 | B3F-1000 OK Omron | SW_PUSH_6mm | SW5 |
| 1 | B3F-1000 BACK Omron | SW_PUSH_6mm | SW6 |
| 1 | B3F-1000 BOOT Omron | SW_PUSH_6mm | SW7 |
| 1 | B3F-1000 RESET Omron | SW_PUSH_6mm | SW8 |
| 1 | LTST-C170KFKT STATUS amber Lite-On | LED_0805_2012Metric | D1 |
| 1 | SMBJ10A SMBJ10A VBUS TVS Littelfuse | D_SMB | D2 |
| 1 | SRN6028C-3R9M 3.9uH Bourns | L_Bourns-SRN6028 | L1 |
| 3 | GRM21BR71A105KA01L 1u Murata | C_0805_2012Metric | C1, C17, C21 |
| 6 | GRM31CR61A226KE19L 22u Murata | C_1206_3216Metric | C2, C10, C11, C14, C15, C19 |
| 10 | GRM21BR71H104KA01L 100n Murata | C_0805_2012Metric | C3, C6, C9, C16, C18, C20, C22, C23 +2 |
| 1 | GRM31CR61A106KA01L 10u Murata | C_1206_3216Metric | C8 |
| 1 | GRM21BR71H473KA01L 47n Murata | C_0805_2012Metric | C26 |
| 10 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R1, R2, R20, R25, R29, R30, R42, R43 +2 |
| 2 | RC0805FR-0722RL 22 Yageo | R_0805_2012Metric | R7, R8 |
| 6 | RC0805FR-07100KL 100k Yageo | R_0805_2012Metric | R9, R37, R41, R48, R49, R50 |
| 9 | RC0805FR-0733RL 33 Yageo | R_0805_2012Metric | R10, R11, R17, R18, R19, R27, R28, R46 +1 |
| 3 | RC0805FR-074K7L 4.7k Yageo | R_0805_2012Metric | R13, R14, R24 |
| 1 | RC0805FR-0782KL 82k Yageo | R_0805_2012Metric | R15 |
| 1 | RC0805FR-07560KL 560k Yageo | R_0805_2012Metric | R16 |
| 1 | RC0805JR-070RL 0 Yageo | R_0805_2012Metric | R21 |
| 2 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R22, R31 |
| 1 | RC0805FR-072K2L 2.2k Yageo | R_0805_2012Metric | R23 |
| 1 | RC0805FR-0722KL 22k Yageo | R_0805_2012Metric | R26 |
| 2 | RC0805FR-0747KL 47k Yageo | R_0805_2012Metric | R32, R33 |
| 1 | RC0805FR-07887KL 887k Yageo | R_0805_2012Metric | R34 |
| 1 | RC0805FR-0734K8L 34.8k Yageo | R_0805_2012Metric | R35 |
| 1 | RC0805FR-07309KL 309k Yageo | R_0805_2012Metric | R36 |
| 1 | RT0805BRD07475KL 475k Yageo | R_0805_2012Metric | R38 |
| 1 | RT0805BRD07100KL 100k Yageo | R_0805_2012Metric | R39 |
| 1 | RC0805FR-07332KL 332k Yageo | R_0805_2012Metric | R40 |
Nexus pear reva design files
The KiCad project lives in the aminewe898/nexus-pear-reva repository on GitHub; these links point at the commit this page was built from.
Nexus pear reva: common questions
What microcontroller does the Nexus pear reva use?
The Nexus pear reva is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Nexus pear reva PCB?
The Nexus pear reva measures 100 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Nexus pear reva?
96 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nexus pear reva design files?
From the aminewe898/nexus-pear-reva repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Nexus pear reva design in my own project?
The repository has no license, so all rights stay with aminewe898. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nexus pear reva without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k