6 open source boards using the TXU0104PWR
Real designs built with the TXU0104PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
RP2040/RP2350LabNode-Nexus
aleko-khomasuridze
100 × 100 mm252 parts4LNo license1
CabShield
Avery-Jutkowitz
200 × 150 mm141 parts4LNo license0
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
RP2040/RP2350LogicAnalyzer
57 × 55.2 mm6 parts2LGPL-3.05.0k
The TXU0104PWR in open source designs
The gallery holds 6 open source boards using the TXU0104PWR from 3 GitHub repositories; a typical one measures about 56.3 × 60.1 mm and carries around 40 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is AnalyzerBoxPCB fork by gusmanb.
Microcontrollers on boards using the TXU0104PWR
What boards using the TXU0104PWR are built for
TXU0104PWR: common questions
Where can I find a TXU0104PWR reference design?
Each of the 6 boards on this page is a real design using the TXU0104PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXU0104PWR use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the TXU0104PWR?
The median is 56.3 × 60.1 mm, and 33% are two-layer designs.
What is the most popular open source board using the TXU0104PWR?
By GitHub stars, AnalyzerBoxPCB fork by gusmanb, with 4,991 stars.
Can I simulate one of these boards using the TXU0104PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.