9 open source boards using the TLV76033DBZR
Real designs built with the TLV76033DBZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
USB-C PD 5V supply — development
rjwalters
100 × 65 mm47 parts4LMIT74Power supply
matthieuvigne
58 × 61.1 mm77 parts4LGPL-3.05PIC
ILV2-7-5 VFD Display
biomurph
92 × 76 mm50 parts2LGPL-3.03I.MX 6ULL Bare Bones
a1wolfe
139.7 × 88.9 mm502 parts6LNo license0ESP32
Custom round pcb led flash
xmyoot
84 × 84 mm224 parts4LNo license0STM32
Bottom
StanZalewski
83.3 × 88.1 mm115 parts4LNo license0ESP32
Nexus pear reva
aminewe898
100 × 90 mm96 parts4LNo license0EGSE2
parsa-novin
101.6 × 81.3 mm79 parts4LNo license2Bustingballscrazystylenolube
parsa-novin
101.6 × 81.3 mm73 parts2LNo license2
How designs wire the TLV76033DBZR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TLV76033DBZR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 3.3V on 5 of 8 designs (a signal on 3).
- The IN pin is tied to VBUS_RAW on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 63% · a signal 38% | — |
| INpin 2 | Connected to: VBUS_RAW 63% · a signal 38% | — |
| GNDpin 3 | Connected to: GND 88% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include USB-C PD 5V supply — development by rjwalters, Power supply by matthieuvigne, ILV2-7-5 VFD Display by biomurph and Bustingballscrazystylenolube by parsa-novin.
The TLV76033DBZR in open source designs
The gallery holds 9 open source boards using the TLV76033DBZR from 8 GitHub repositories; a typical one measures about 100 × 81.3 mm and carries around 79 components.
78% use four copper layers or more, and 33% carry an open source license.
The most starred is USB-C PD 5V supply — development by rjwalters.
Parts used alongside the TLV76033DBZR
What boards using the TLV76033DBZR are built for
TLV76033DBZR: common questions
Where can I find a TLV76033DBZR reference design?
Each of the 9 boards on this page is a real design using the TLV76033DBZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV76033DBZR OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the TLV76033DBZR.
How is the TLV76033DBZR IN pin connected?
The IN pin is tied to VBUS_RAW on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the TLV76033DBZR.
Which microcontrollers do boards using the TLV76033DBZR use?
Most are built on ESP32 (2), PIC (1) and STM32 (1).
How big is a typical board using the TLV76033DBZR?
The median is 100 × 81.3 mm, and 22% are two-layer designs.
What is the most popular open source board using the TLV76033DBZR?
By GitHub stars, USB-C PD 5V supply — development by rjwalters, with 74 stars.
Can I simulate one of these boards using the TLV76033DBZR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.