4 open source boards using the PESD5V0S2BT,215
Real designs built with the PESD5V0S2BT,215, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Smove r2-main
okbrainhq
25 × 30 mm48 parts4LMIT0
ESP32Faf335b recovered
25 × 30 mm46 parts4LMIT0
ESP32Freerouting rejected-3-opens-In1
25 × 30 mm46 parts4LMIT0
ESP32Manual refilled-15-opens
25 × 30 mm46 parts4LMIT0
The PESD5V0S2BT,215 in open source designs
The gallery holds 4 open source boards using the PESD5V0S2BT,215 from 1 GitHub repository; a typical one measures about 25 × 30 mm and carries around 46 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Smove r2-main by okbrainhq.
Microcontrollers on boards using the PESD5V0S2BT,215
What boards using the PESD5V0S2BT,215 are built for
PESD5V0S2BT,215: common questions
Where can I find a PESD5V0S2BT,215 reference design?
Each of the 4 boards on this page is a real design using the PESD5V0S2BT,215. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PESD5V0S2BT,215 use?
Most are built on ESP32 (4).
How big is a typical board using the PESD5V0S2BT,215?
The median is 25 × 30 mm, and 0% are two-layer designs.
What is the most popular open source board using the PESD5V0S2BT,215?
By GitHub stars, Smove r2-main by okbrainhq, with 0 stars.
Can I simulate one of these boards using the PESD5V0S2BT,215 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.