Weatherframe placed
amselgesang·weatherframe_v01·hardware/kicad/weatherframe/build/weatherframe_placed.kicad_pcb
About the Weatherframe placed PCB
Weatherframe placed is an open source ESP32 PCB design by amselgesang, published on GitHub under the MIT license. It is a 2-layer board measuring 64 × 46 mm, with 46 components from 30 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the MCP73831T-2ACI/OT, TPS63001DRCR, SHT40-AD1B-R2 and USBLC6-2SC6. By type, the board carries 16 resistors, 13 capacitors, 5 ICs, 4 switches, 3 connectors and 2 transistors.
It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.
From the project
My weather station hardver
A wall-hung weather station in a picture frame: Waveshare 7.5" e-paper (800 × 480, 4-level grayscale), custom ESP32-S3 board with a rechargeable 1S LiPo, Wi-Fi + Open-Meteo. Wakes every 15 minutes, refreshes the display, sleeps. Charges over USB-C.
The VBUS-sense (GPIO4) and charger-STAT (GPIO15) dividers were 100 k/100 k: 5 V → 2.5 V, which sits exactly on the ESP32-S3's VIH minimum (0.75 × 3.3 V = 2.475 V) and reads undefined on a 4.75 V USB supply. With 150 k on the bottom they give 3.0 V (2.85–3.15 V over the USB range), still below the 3.6 V absolute maximum. Changed in gen/design.py…
Main components on the Weatherframe placed
Weatherframe placed bill of materials (BOM)
46 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | MCP73831T-2ACI/OT MCP73831-2 | SOT-23-5 | U2 |
| 1 | TPS63001DRCR TPS63001 | Texas_DRC0010J | U3 |
| 1 | SHT40-AD1B-R2 SHT40-AD1B | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | PH-2AWT (JST PH 2.0) LiPo 1S | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | 1x9 pin header 2.54 mm (hand-solder) E-Paper HAT | PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | TS-1187A-B-A-B RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | TS-1187A-B-A-B BOOT | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | TS-1187A-B-A-B REFRESH | SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | MSK12C02 MAINT | SW_SPDT_Shouhan_MSK12C02 | SW4 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | KT-0603R CHG | LED_0603_1608Metric | D2 |
| 1 | SWPA4030S1R5NT 1.5uH | L_Changjiang_FNR4030S | L1 |
| 3 | 4.7UF 4.7uF | C_0603_1608Metric | C1, C2, C13 |
| 5 | 100NF 100nF | C_0402_1005Metric | C3, C5, C9, C11, C12 |
| 1 | 10UF 10uF | C_0805_2012Metric | C4 |
| 2 | 22UF 22uF | C_0805_2012Metric | C6, C7 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10UF 10uF | C_0603_1608Metric | C8 |
| 1 | 1UF 1uF | C_0402_1005Metric | C10 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 2k | R_0402_1005Metric | R3 |
| 1 | 1k | R_0402_1005Metric | R4 |
| 3 | 100K 100k | R_0402_1005Metric | R5, R10, R17 |
| 2 | 150K 100k | R_0402_1005Metric | R6, R11 |
| 2 | 1M | R_0402_1005Metric | R8, R9 |
| 3 | 10K 10k | R_0402_1005Metric | R12, R13, R14 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R15, R16 |
Weatherframe placed design files
The KiCad project lives in the amselgesang/weatherframe_v01 repository on GitHub; these links point at the commit this page was built from.
Weatherframe placed: common questions
What microcontroller does the Weatherframe placed use?
The Weatherframe placed is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Weatherframe placed PCB?
The Weatherframe placed measures 64 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Weatherframe placed?
46 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Weatherframe placed design files?
From the amselgesang/weatherframe_v01 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Weatherframe placed design in my own project?
Yes, under the terms of its MIT license, which amselgesang chose for the repository.
Can I test firmware for the Weatherframe placed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in weatherframe_v01
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k