2 open source boards using the TEENSY_3.5_3.6_BASIC
Real designs built with the TEENSY_3.5_3.6_BASIC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Carte Principale
AREA-Amiens
80 × 65 mm44 partsNo license0NXP
Carte Principale
PCBrs
80 × 65 mm44 partsNo license0
The TEENSY_3.5_3.6_BASIC in open source designs
The gallery holds 2 open source boards using the TEENSY_3.5_3.6_BASIC from 2 GitHub repositories; a typical one measures about 80 × 65 mm and carries around 44 components.
0% carry an open source license.
The most starred is Carte Principale by AREA-Amiens.
Parts used alongside the TEENSY_3.5_3.6_BASIC
Microcontrollers on boards using the TEENSY_3.5_3.6_BASIC
What boards using the TEENSY_3.5_3.6_BASIC are built for
TEENSY_3.5_3.6_BASIC: common questions
Where can I find a TEENSY_3.5_3.6_BASIC reference design?
Each of the 2 boards on this page is a real design using the TEENSY_3.5_3.6_BASIC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TEENSY_3.5_3.6_BASIC?
The CONDO2-5, DRV8825, SN65HVD232D and XBEE appear in the most repositories here.
Which microcontrollers do boards using the TEENSY_3.5_3.6_BASIC use?
Most are built on NXP (2).
How big is a typical board using the TEENSY_3.5_3.6_BASIC?
The median is 80 × 65 mm.
What is the most popular open source board using the TEENSY_3.5_3.6_BASIC?
By GitHub stars, Carte Principale by AREA-Amiens, with 0 stars.
Can I simulate one of these boards using the TEENSY_3.5_3.6_BASIC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.