RED 80
assoRED·RED_80·KiCad/RED_80/RED_80.kicad_pcb
About the RED 80 PCB
RED 80 is an open source PCB design by assoRED, published on GitHub. It is a 4-layer board measuring 108.7 × 104.1 mm, with 44 components from 29 distinct parts.
Other key parts include the Z80CPU, AS6C62256, 4011, 4071 and 40106. By type, the board carries 13 ICs, 12 capacitors, 10 resistors, 4 connectors, 2 crystals and 2 switches.
It belongs with the retro computing designs in this gallery.
From the project
RED_80 is a super simple Z80 based MicroComputer designed and built by RED
- CMOS z80 CPU - AS6c62256 32k*8bits CMOS low power SRAM - CMOS 4011 quad NAND logic gate - CMOS 4071 quad OR logic gate - CMOS 40106 hex trigger - 1x tactile switch - 3x poalized electrolytic 0.01uF capacitor - 2x ceramic (unpolarized) 22pF capactitor - Crystal (freq. TBD) - 1x 10k resistror - 1x 1M resistor
- 0x0000 system reset/init - memroy monitor
System has been designed to be interfaced with a French Minitel 1B made by MATRA communication terminal.
Main components on the RED 80
RED 80 bill of materials (BOM)
44 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Z80CPU | DIP-40_W15.24mm_Socket | U1 |
| 1 | AS6C62256 | DIP-28_W15.24mm_Socket | U2 |
| 1 | 4011 | DIP-14_W7.62mm_Socket | U3 |
| 2 | 4071 | DIP-14_W7.62mm_Socket | U4, U8 |
| 1 | 40106 | DIP-14_W7.62mm_Socket | U5 |
| 1 | 28C64 | DIP-28_W15.24mm_Socket | U6 |
| 1 | 28C64 | 3M-TEXTOOL-ZIF-DIP-28 | U7 |
| 1 | L7805 | TO-220-3_Vertical | U9 |
| 1 | 16550 | DIP-40_W15.24mm_Socket | U10 |
| 1 | MAX232 | DIP-16_W7.62mm_Socket | U11 |
| 2 | 4075 | DIP-14_W7.62mm_Socket | U12, U13 |
| 2 | Crystal | Crystal_HC18-U_Vertical | Y1, Y2 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Tensility_54-00023_Vertical | J2 |
| 1 | Conn_01x29_Male | PinHeader_1x29_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | RESET_SW | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW2 |
| 1 | LED | LED_D5.0mm | D1 |
| 3 | 0.01uF | CP_Radial_D4.0mm_P1.50mm | C1, C2, C3 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 22pF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C4, C5, C9, C10 |
| 1 | 100nf | CP_Radial_D5.0mm_P2.50mm | C6 |
| 2 | CP | CP_Radial_D4.0mm_P1.50mm | C7, C8 |
| 2 | C | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C11, C12 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 2 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R5 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R6 |
| 4 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R4, R8, R9, R10 |
| 1 | 180 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7 |
RED 80 design files
The KiCad project lives in the assoRED/RED_80 repository on GitHub; these links point at the commit this page was built from.
RED 80: common questions
How big is the RED 80 PCB?
The RED 80 measures 108.7 × 104.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RED 80?
44 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the RED 80 design files?
From the assoRED/RED_80 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RED 80 design in my own project?
The repository has no license, so all rights stay with assoRED. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k