CanSat2
budabalint·T.E.E.M.O·Circuit/CanSat/CanSat2.kicad_pcb
About the CanSat2 PCB
CanSat2 is an open source ESP32 PCB design by budabalint, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 102 components from 39 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS61088RHLT, VEML7700-TR, SGP41-D-R4, AP64501SP-13 and INA226. By type, the board carries 49 capacitors, 23 resistors, 12 ICs, 8 connectors, 5 diodes and 2 transistors.
Main components on the CanSat2
CanSat2 bill of materials (BOM)
102 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61088RHLT | BQ24031IRHLRQ1 | IC1 |
| 1 | VEML7700-TR | XDCR_VEML7700-TR | U1 |
| 1 | SGP41-D-R4 | XDCR_SGP41-D-R4 | U2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 1 | AP64501SP-13 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias_BigVias | U4 |
| 2 | INA226 | VSSOP-10_3x3mm_P0.5mm | U5, U14 |
| 1 | ASEK-32.768KHZ-L-R-T | Crystal_SMD_3225-4Pin_3.2x2.5mm | U7 |
| 1 | CH340G | SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | W5500IO | W5500-io | U9 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U21 |
| 1 | BNO085 | LGA-28_5.2x3.8mm_P0.5mm | U23 |
| 2 | BC817 | SOT-23 | Q1, Q2 |
| 1 | 12MHz | Crystal_SMD_HC49-SD | Y2 |
| 1 | GPS | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J1 |
| 1 | Conn_01x02_Socket | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | FLIR | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J3 |
| 1 | 2.4G_Radio | PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | J7 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_C | USB_C_Receptacle_Palconn_UTC16-G | J12 |
| 5 | LED | D_1206_3216Metric | D1, D2, D3, D5, D6 |
| 2 | HCM0703-3R3-R | HCM1A0805 | L1, L2 |
| 14 | 100nf | C_0805_2012Metric | C1, C2, C3, C4, C7, C16, C19, C25 +6 |
| 3 | 1uf | C_0805_2012Metric | C5, C6, C8 |
| 1 | 1.2nF | C_0805_2012Metric | C9 |
| 3 | 100n | C_0805_2012Metric | C10, C32, C40 |
| 23 | 4,7uf | C_0805_2012Metric | C11, C12, C13, C15, C17, C18, C20, C21 +15 |
| 3 | 68pf | C_0805_2012Metric | C14, C37, C41 |
| 2 | 22pf | C_0805_2012Metric | C56, C57 |
| 2 | 0.056Ω | R_1206_3216Metric | R1, R28 |
| 4 | 105k | R_0805_2012Metric | R2, R3, R6, R37 |
| 3 | 33k | R_0805_2012Metric | R4, R5, R39 |
| 4 | 10k | R_0805_2012Metric | R7, R8, R10, R97 |
| 2 | 5.1K | R_0805_2012Metric | R9, R26 |
| 4 | 1K | R_0805_2012Metric | R11, R12, R93, R94 |
| 2 | 10R | R_0805_2012Metric | R35, R98 |
| 1 | 100R | R_0805_2012Metric | R36 |
| 1 | 12K 1% | R_0805_2012Metric | R38 |
CanSat2 design files
The KiCad project lives in the budabalint/T.E.E.M.O repository on GitHub; these links point at the commit this page was built from.
CanSat2: common questions
What microcontroller does the CanSat2 use?
The CanSat2 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the CanSat2 PCB?
The CanSat2 measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CanSat2?
102 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the CanSat2 design files?
From the budabalint/T.E.E.M.O repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CanSat2 design in my own project?
The repository has no license, so all rights stay with budabalint. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CanSat2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in T.E.E.M.O
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k