D03-MAIN-CTRL

byhabibi·d03-pcb·KiCad_LIVE_PRE_ROUTE/D03-MAIN-CTRL/D03-MAIN-CTRL.kicad_pcb

D03-MAIN-CTRL PCB layout, top view — open source ESP32 board by byhabibi

About the D03-MAIN-CTRL PCB

D03-MAIN-CTRL is an open source ESP32 PCB design by byhabibi, published on GitHub. It is a 2-layer board measuring 160 × 115 mm, with 59 components from 32 distinct parts.

Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the MCP1700-3302E, MP1584-FIXED-5V, MAX31856 Bean, MAX31856 Env and MAX31856 Motor. By type, the board carries 21 ICs, 15 capacitors, 8 resistors, 5 connectors, 1 transistor and 1 diode.

From the project

Control PCBs for a 3 kg LPG drum roaster. KiCad schematic and board seats.

D03 KiCad LIVE — PRE-ROUTE (Fase 1 seats locked) Tanggal sync: 2026-07-20

STATUS: GO ROUTE — seats + pad-nets tally BOM / wiring / firmware (lihat ../PREROUTESENIOREEGATEBOMWIRINGFW2026-07-20.txt)

BUKA ---- D03-MAIN-CTRL/D03-MAIN-CTRL.kicadpro D03-IO-PWR/D03-IO-PWR.kicadpro

SEAT LOCK --------- U1 = MODULEESP32DEVKITC (USB = atas / -Y) U3 = MODULEMP15844P FIXED 5V U4/U5/U6 = MODULEMAX318568P JH1 = 2x16 · U12/U13 MCP4725 · U22 PCF8591 U8 + JUSB = DNP MAIN outline ~160x115 mm · tracks MAIN cleared for fresh route

Main components on the D03-MAIN-CTRL

D03-MAIN-CTRL bill of materials (BOM)

59 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKITC-32E
ESP32-DevKitC-32E
Espressif
U1
1
MCP1700-3302E
Microchip
U2
1
MP1584-FIXED-5V
MP1584 FIXED 5V
Generic/MP
U3
1
MAX31856 Bean
U4
1
MAX31856 Env
U5
1
MAX31856 Motor
U6
1
MAX3485ESA+
Maxim
U7
1
CP2102N-A02-GQFN24
CP2102N-A02
Silicon Labs
U8
1
DFPlayer Mini
U9
1
PCF8574AP
PCF8574AP @0x20
NXP
U10
1
PCF8574AP
PCF8574AP @0x21
NXP
U11
1
MCP4725A0T-E/CH
MCP4725 @0x60
Microchip
U12
1
MCP4725A0T-E/CH
MCP4725 @0x61
Microchip
U13
5
PC817C
Everlight
U14, U15, U16, U17, U18
2
PC817C
PC817 spare
Everlight
U19, U21
1
PCF8591P
PCF8591 @0x48
Microchip
U22
1
BC847C
ON Semi
Q1
1
PCC-SMP-K Bean
J1
1
PCC-SMP-K Env
J2
1
PCC-SMP-K Motor
J3
Show 12 more
QtyPartRefs
1
1757018
RS485 3p
Phoenix
J4
1
IDC-20
IDC 2x10
Generic
J9
4
FB
FB_TC1, FB_TC2, FB_TC3, FB_TC4
1
H1 2x16
J_H1
2
560R
R_BIAS1, R_BIAS2
1
PC817 spare (was U20)
U_OPT20
1
SMAJ6.5CA
D1
3
10uF
C3, C4, C10
10
100nF
C5, C6, C7, C8, C9, C11, C13, C15 +2
2
100pF
C12, C14
4
4k7
R1, R3, R5, R7
4
10k
R2, R4, R6, R8

D03-MAIN-CTRL design files

The KiCad project lives in the byhabibi/d03-pcb repository on GitHub; these links point at the commit this page was built from.

D03-MAIN-CTRL: common questions

What microcontroller does the D03-MAIN-CTRL use?

The D03-MAIN-CTRL is built around the ESP32-DEVKITC-32E, from the ESP32 family.

How big is the D03-MAIN-CTRL PCB?

The D03-MAIN-CTRL measures 160 × 115 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the D03-MAIN-CTRL?

59 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the D03-MAIN-CTRL design files?

From the byhabibi/d03-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the D03-MAIN-CTRL design in my own project?

The repository has no license, so all rights stay with byhabibi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the D03-MAIN-CTRL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in d03-pcb

Similar boards