Clock input-3
About the Clock input-3 PCB
Clock input-3 is an open source PCB design by carr-james, published on GitHub. It is a 2-layer board, with 20 components from 5 distinct parts.
Other key parts include the 40106. By type, the board carries 9 diodes, 7 resistors, 2 ICs and 2 capacitors.
It belongs with the audio designs in this gallery.
From the project
Reusable Eurorack circuit blocks (KiCad 10 design blocks) and house design rules
Conditions up to three external clocks, gates or triggers into clean CMOS logic levels.
Three copies of clock-input sharing one package. Each channel takes a signal from a jack and gives a clean 0V to +5V logic signal with the same polarity. It tolerates any voltage present in a Eurorack case, including negative swings from an LFO.
The circuit per channel is identical to clock-input. Read that block for the analysis; this one only changes the channel count.
Main components on the Clock input-3
Clock input-3 bill of materials (BOM)
20 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 40106 | DIP-14_W7.62mm | U1, U2 |
| 9 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 2 | 100nF | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C6 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R6 |
| 3 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R7 |
Clock input-3 design files
The KiCad project lives in the carr-james/eurorack-blocks repository on GitHub; these links point at the commit this page was built from.
Clock input-3: common questions
How big is the Clock input-3 PCB?
The Clock input-3 has 2 copper layers and is 1.6 mm thick.
How many components are on the Clock input-3?
20 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clock input-3 design files?
From the carr-james/eurorack-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Clock input-3 design in my own project?
The repository has no license, so all rights stay with carr-james. Use it as a reference, and ask the author before reusing the design.
More boards in eurorack-blocks
- schematic only · 12 parts
Cv scale offset
12 parts2LNo license0 - schematic only · 12 parts
Cv output
12 parts2LNo license0 - schematic only · 9 parts
Regulator-5v
9 parts2LNo license0 - schematic only · 8 parts
Step counter
8 parts2LNo license0 - schematic only · 8 parts
Cv mux-8
8 parts2LNo license0 - schematic only · 6 parts
Gate output
6 parts2LNo license0 - schematic only · 6 parts
Clock input
6 parts2LNo license0 - schematic only · 5 parts
Power input
5 parts2LNo license0 - schematic only · 4 parts
Bus enable
4 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687