8 open source boards using the BUZZER

Real designs built with the BUZZER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The BUZZER in open source designs

The gallery holds 8 open source boards using the BUZZER from 8 GitHub repositories; a typical one measures about 73 × 79.2 mm and carries around 49 components.

88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is BATS by brico-labs.

Parts used alongside the BUZZER

Microcontrollers on boards using the BUZZER

BUZZER: common questions

Where can I find a BUZZER reference design?

Each of the 8 boards on this page is a real design using the BUZZER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BUZZER use?

Most are built on AVR/Arduino (4), ESP32 (1), ESP8266 (1) and NXP (1).

How big is a typical board using the BUZZER?

The median is 73 × 79.2 mm, and 88% are two-layer designs.

What is the most popular open source board using the BUZZER?

By GitHub stars, BATS by brico-labs, with 8 stars.

Can I simulate one of these boards using the BUZZER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part