ESP32-sensor board
chopda15·ESP32-sensor-board·KiCad_Project/ESP32-sensor-board.kicad_pcb
About the ESP32-sensor board
ESP32-sensor board is an open source ESP32 PCB design by chopda15, published on GitHub. It is a 4-layer board measuring 107.6 × 55 mm, with 85 components from 40 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-H4, from the ESP32 family. Other key parts include the MCP73871-2CAI_ML, BME280, CP2102N-AXX-XQFN20, USBLC6-2SC6 and W25Q32JVSSIQ. By type, the board carries 33 resistors, 25 capacitors, 7 ICs, 6 LEDs, 5 connectors and 3 transistors.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.
Custom-designed IoT PCB built in KiCad featuring the ESP32-C3-WROOM-02 module, integrated Li-ion charging circuitry, environmental sensing, onboard storage, and USB-C connectivity.
This project was developed to practice real-world embedded hardware design workflows including schematic capture, PCB layout, signal integrity considerations, power management, DFM validation, and manufacturing preparation.
Main components on the ESP32-sensor board
ESP32-sensor board bill of materials (BOM)
85 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73871-2CAI_ML | QFN50P400X400X100-21N | U1 |
| 1 | BME280 | PSON65P250X250X100-8N | U2 |
| 1 | ESP32-C3-WROOM-02-H4 | MODULE_ESP32-C3-WROOM-02-H4 | U3 |
| 1 | CP2102N-AXX-XQFN20 CP2102N-Axx-xQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | W25Q32JVSSIQ | SOIC127P790X216-8N | U6 |
| 1 | MAX4466EXK | SOT65P210X110-5N | U8 |
| 1 | TEMT6000X01 | TRANS_TEMT6000X01 | Q1 |
| 2 | BC817 | SOT-23 | Q2, Q3 |
| 1 | SS-52400-002 | BELFUSE_SS-52400-002 | J1 |
| 1 | B2B-PH-SM4-TB | JST_B2B-PH-SM4-TB | J2 |
| 1 | GSD090012SEU | AMPHENOL_GSD090012SEU | J3 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 2 | 0ZCH0110AF2E | FUSC3226X100N | F1, F2 |
| 1 | CMC-5042PF-AC | CUI_CMC-5042PF-AC | MK1 |
| 2 | USLPT2819DT2TR | SW_TL3305AF260QG | S1, S2 |
| 1 | LM1117MPX-3.3 | VREG_LM1117MPX-3.3_NOPB | VR1 |
| 3 | LTST-C170KRKT | LEDC2012X120N | LED1, LED4, LED5 |
| 2 | LTST-C170GKT | LEDC2012X120N | LED2, LED6 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTST-C170TBKT | LEDC2012X120N | LED3 |
| 13 | 0.1U 0.1u | C_0805_2012Metric | C1, C2, C5, C8, C10, C13, C14, C15 +5 |
| 4 | 10U 10u | T491A | C3, C4, C7, C12 |
| 2 | 1u | C_0805_2012Metric | C6, C11 |
| 1 | 4.7U 4.7u | T491A | C9 |
| 3 | 10N 10n | C_0805_2012Metric | C17, C24, C25 |
| 1 | 10U 10u | C_0805_2012Metric | C19 |
| 1 | 100PF 100pF | C_0805_2012Metric | C20 |
| 8 | 10K | R_0805_2012Metric | R1, R2, R6, R19, R23, R32, R33, R34 |
| 2 | 5.1K | R_0805_2012Metric | R3, R4 |
| 2 | 2K | R_0805_2012Metric | R5, R26 |
| 6 | 470 | R_0805_2012Metric | R7, R8, R9, R10, R14, R18 |
| 2 | 1K | R_0805_2012Metric | R11, R30 |
| 1 | 47K5 | R_0805_2012Metric | R12 |
| 1 | 22K1 | R_0805_2012Metric | R13 |
| 4 | 50 | R_0805_2012Metric | R15, R16, R20, R22 |
| 1 | 35WR100KLFTR | TRIM_35WR100KLFTR | R17 |
| 2 | 4K7 | R_0805_2012Metric | R24, R25 |
| 3 | 1M | R_0805_2012Metric | R27, R28, R29 |
| 1 | 22K | R_0805_2012Metric | R31 |
ESP32-sensor board design files
The KiCad project lives in the chopda15/ESP32-sensor-board repository on GitHub; these links point at the commit this page was built from.
ESP32-sensor board: common questions
What microcontroller does the ESP32-sensor board use?
The ESP32-sensor board is built around the ESP32-C3-WROOM-02-H4, from the ESP32 family.
How big is the ESP32-sensor board?
The ESP32-sensor board measures 107.6 × 55 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-sensor board?
85 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-sensor board design files?
From the chopda15/ESP32-sensor-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-sensor board design in my own project?
The repository has no license, so all rights stay with chopda15. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-sensor board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k