12 open source boards using the MCP73871-2CAI_ML
Real designs built with the MCP73871-2CAI_ML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OpenAirScope
emertcakir
100 × 75 mm247 parts4LMIT26ESP32
IOT-project
datnguyenhcmut
100 × 75 mm247 parts4LMIT0ESP32
ESP32-S3-4Layer-CoreBoard
gorkemguven
102.9 × 43.7 mm101 parts4LGPL-3.00ESP32
Secure edge logger
landjas09
87.5 × 54.7 mm92 parts4LNo license0ESP32
ESP32-sensor board
chopda15
107.6 × 55 mm85 parts4LNo license0ESP32
ESP32 based dev board
harris8099
84.5 × 54.8 mm85 parts4LNo license0ESP32
ESP32
Chockalingam-M
75.5 × 53.2 mm82 parts4LNo license0ESP32
Esp32-iot board project
Iamshubham3
86.5 × 51.5 mm81 parts4LNo license0ESP32
ESP32-IoT-Sensor-Hub-Manufacturing-Ready-
Asaf66
79.5 × 61.4 mm80 parts4LNo license0ESP32
ESP32-C3-IoT-Board
PascalMALLE
81.3 × 52.9 mm79 parts4LNo license0ESP32
ESP32 IOT Board
PotatoPerchance
82.8 × 58.4 mm74 parts4LNo license0ESP32
IOT DEV BOARD
landjas09
81.2 × 54.7 mm81 parts4LNo license0
How designs wire the MCP73871-2CAI_ML
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MCP73871-2CAI_ML connects to, and the resistors, capacitors and other passives placed on it.
- The THERM pin has a resistor to GND on 11 of 11 designs, most often 10 kΩ.
- The PG pin has a series resistor on 11 of 11 designs, most often 470 Ω (then 1 kΩ).
- The STAT2 pin has a series resistor on 11 of 11 designs, most often 470 Ω (then 1 kΩ).
- The STAT1/LBO pin has a series resistor on 11 of 11 designs, most often 470 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1, 20 | Connected to: 5V 64% · a signal 32% | — |
| VPCCpin 2 | Connected to: 5V 73% · a signal 27% |
|
| SELpin 3 | Connected to: GND 82% · a signal 18% | — |
| PROG2pin 4 | Connected to: 5V 64% · a signal 27% | — |
| THERMpin 5 | Connected to: Signal 100% |
|
| PGpin 6 | Connected to: Signal 100% |
|
| STAT2pin 7 | Connected to: Signal 100% |
|
| STAT1/LBOpin 8 | Connected to: Signal 100% |
|
| TEpin 9 | Connected to: Signal 91% |
|
| VSSpin 10, 11, 21 | Connected to: GND 94% | — |
| PROG3pin 12 | Connected to: Signal 100% |
|
| PROG1pin 13 | Connected to: Signal 100% |
|
| VBATpin 14, 15 | Connected to: VBAT 82% |
|
| VBAT_SENSEpin 16 | Connected to: VBAT 91% |
|
| CEpin 17 | Connected to: 5V 64% · a signal 27% | — |
| INpin 18, 19 | Connected to: 5V 91% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenAirScope by emertcakir, ESP32-IoT-Sensor-Hub-Manufacturing-Ready- by Asaf66, ESP32 by Chockalingam-M and ESP32-sensor board by chopda15.
The MCP73871-2CAI_ML in open source designs
The gallery holds 12 open source boards using the MCP73871-2CAI_ML from 11 GitHub repositories; a typical one measures about 85.5 × 54.7 mm and carries around 84 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is OpenAirScope by emertcakir.
Parts used alongside the MCP73871-2CAI_ML
Microcontrollers on boards using the MCP73871-2CAI_ML
What boards using the MCP73871-2CAI_ML are built for
MCP73871-2CAI_ML: common questions
Where can I find a MCP73871-2CAI_ML reference design?
Each of the 12 boards on this page is a real design using the MCP73871-2CAI_ML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73871-2CAI_ML THERM pin?
The THERM pin has a resistor to GND on 11 of 11 designs, most often 10 kΩ. Counted from the KiCad layouts of 11 open source designs using the MCP73871-2CAI_ML.
What resistor goes on the MCP73871-2CAI_ML PG pin?
The PG pin has a series resistor on 11 of 11 designs, most often 470 Ω (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the MCP73871-2CAI_ML.
What resistor goes on the MCP73871-2CAI_ML STAT2 pin?
The STAT2 pin has a series resistor on 11 of 11 designs, most often 470 Ω (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the MCP73871-2CAI_ML.
What parts are used alongside the MCP73871-2CAI_ML?
The BME280, MAX4466EXK, USBLC6-2SC6, CP2102N-Axx-xQFN20 and ESP32-C3-WROOM-02-H4 appear in the most repositories here.
Which microcontrollers do boards using the MCP73871-2CAI_ML use?
Most are built on ESP32 (12).
How big is a typical board using the MCP73871-2CAI_ML?
The median is 85.5 × 54.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP73871-2CAI_ML?
By GitHub stars, OpenAirScope by emertcakir, with 26 stars.
Can I simulate one of these boards using the MCP73871-2CAI_ML before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.