54 open source boards using the 74LS273

Real designs built with the 74LS273, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

54 boardsClear filters|Most starred

How designs wire the 74LS273

Read from the KiCad layouts of 35 open source designs, one per repository: what each pin of the 74LS273 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 10Connected to: GND 97%
VCCpin 20Connected to: VCC 94%
  • Decoupling capacitor on 31% · 100 nF (9)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CGA Redux by hkzlab, 80ColumnCard by btb, Vectron vga plus by nickbild and Dragon64 by danwerner21.

The 74LS273 in open source designs

The gallery holds 54 open source boards using the 74LS273 from 42 GitHub repositories; a typical one measures about 229.9 × 114.3 mm and carries around 131 components.

74% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is CGA Redux by hkzlab.

Microcontrollers on boards using the 74LS273

74LS273: common questions

Where can I find a 74LS273 reference design?

Each of the 54 boards on this page is a real design using the 74LS273. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS273?

The 74LS138, 74LS32, 74LS04, 74LS245 and 74LS08 appear in the most repositories here.

Which microcontrollers do boards using the 74LS273 use?

Most are built on AVR/Arduino (4) and STM32 (1).

How big is a typical board using the 74LS273?

The median is 229.9 × 114.3 mm, and 74% are two-layer designs.

What is the most popular open source board using the 74LS273?

By GitHub stars, CGA Redux by hkzlab, with 56 stars.

Can I simulate one of these boards using the 74LS273 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part