15 open source boards using the 74LS76

Real designs built with the 74LS76, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the 74LS76

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74LS76 connects to, and the resistors, capacitors and other passives placed on it.

  • The S pins is tied to VCC on 80% of them (not connected on 3, a signal on 3).
  • The R pins is tied to VCC on 77% of them (not connected on 3, a signal on 4).
  • The J pins is tied to VCC on 77% of them (not connected on 4, a signal on 3).
  • The K pins is tied to VCC on 77% of them (not connected on 4, a signal on 2).
Spin 2, 7Connected to: VCC 80%
Rpin 3, 8Connected to: VCC 77%
Jpin 4, 9Connected to: VCC 77%
VCCpin 5Connected to: VCC 93%
Kpin 12, 16Connected to: VCC 77%
GNDpin 13Connected to: GND 87%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Eda designs by kyllikki, 8bitCPU by BrainwashAlpha, Exorset Floppy by roberto314 and TicTacToe---Using-Digital-Logic by rougeDAG.

The 74LS76 in open source designs

The gallery holds 15 open source boards using the 74LS76 from 15 GitHub repositories; a typical one measures about 246.4 × 185.4 mm and carries around 277 components.

53% use four copper layers or more, and 20% carry an open source license.

The most starred is Eda designs by kyllikki.

What boards using the 74LS76 are built for

74LS76: common questions

Where can I find a 74LS76 reference design?

Each of the 15 boards on this page is a real design using the 74LS76. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS76 S pin connected?

The S pins is tied to VCC on 80% of them (not connected on 3, a signal on 3). Counted from the KiCad layouts of 15 open source designs using the 74LS76.

How is the 74LS76 R pin connected?

The R pins is tied to VCC on 77% of them (not connected on 3, a signal on 4). Counted from the KiCad layouts of 15 open source designs using the 74LS76.

How is the 74LS76 J pin connected?

The J pins is tied to VCC on 77% of them (not connected on 4, a signal on 3). Counted from the KiCad layouts of 15 open source designs using the 74LS76.

What parts are used alongside the 74LS76?

The 74LS08, 74LS04, 74LS139, 74LS157 and 74LS02 appear in the most repositories here.

How big is a typical board using the 74LS76?

The median is 246.4 × 185.4 mm, and 47% are two-layer designs.

What is the most popular open source board using the 74LS76?

By GitHub stars, Eda designs by kyllikki, with 32 stars.

Can I simulate one of these boards using the 74LS76 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part