18 open source boards using the 24C16
Real designs built with the 24C16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ultra DB X51 v1
ExploreEmbedded
178 × 145 mm132 partsBSD-3-Clause70MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license25MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license17LCSDR
licheegh
100 × 80 mm196 parts4LNo license7Raspberry Pi
Mearm pi hat
mimeindustries
65 × 56.5 mm24 parts2LNo license4Box0-hv analog breakoutboard
riktw
70 × 50 mm57 parts2LNo license3MCU BaseBoard
AhmedElwakeel
180 × 125 mm146 parts2LNo license1OneMicro-Base-Board
ExploreEmbedded
180 × 135 mm143 parts2LNo license1- schematic only · 33 parts
Schematic extractor
D4NGYY
33 partsMIT1 Kicad demo video
aherbez
312 × 106.7 mm188 parts4LNo license0KiCad demo
circuitly
312 × 106.7 mm188 parts4LNo license0KiCad demo
thisis-romar
312 × 106.7 mm185 parts4LNo license0KiCad demo
nickradfc
312 × 106.7 mm185 parts4LNo license0MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0MCU BaseBoard
ExploreEmbedded
180 × 125 mm146 parts2LNo license0Ultra DB X51 v1
shivamag00
178 × 145 mm132 partsNo license0Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0Output register
codemonkey76
72.4 × 74.9 mm21 parts2LNo license0
How designs wire the 24C16
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the 24C16 connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 5V on 14 of 16 designs, most often 3.3 kΩ (then 2.2 kΩ).
- The SDA pin has a pull-up to 5V on 13 of 16 designs, most often 3.3 kΩ (then 2.2 kΩ).
- The A0 pin is tied to GND on 14 of 16 designs.
- The A1 pin is tied to GND on 14 of 16 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 88% | — |
| A1pin 2 | Connected to: GND 88% | — |
| A2pin 3 | Connected to: GND 88% | — |
| GNDpin 4 | Connected to: GND 94% | — |
| SDApin 5 | Connected to: DS1307 50%, a connector 25%, S5933_PQ160 25% |
|
| SCLpin 6 | Connected to: DS1307 50%, S5933_PQ160 25% |
|
| VCCpin 8 | Connected to: 5V 88% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ultra DB X51 v1 by ExploreEmbedded, MCU BaseBoard by ExploreEmbedded, MCU BaseBoard by ExploreEmbedded and LCSDR by licheegh.
The 24C16 in open source designs
The gallery holds 18 open source boards using the 24C16 from 17 GitHub repositories; a typical one measures about 180 × 106.7 mm and carries around 146 components.
67% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Ultra DB X51 v1 by ExploreEmbedded.
Parts used alongside the 24C16
Microcontrollers on boards using the 24C16
What boards using the 24C16 are built for
24C16: common questions
Where can I find a 24C16 reference design?
Each of the 18 boards on this page is a real design using the 24C16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 24C16 SCL pin?
The SCL pin has a pull-up to 5V on 14 of 16 designs, most often 3.3 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 16 open source designs using the 24C16.
What pull-up resistor is used on the 24C16 SDA pin?
The SDA pin has a pull-up to 5V on 13 of 16 designs, most often 3.3 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 16 open source designs using the 24C16.
How is the 24C16 A0 pin connected?
The A0 pin is tied to GND on 14 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the 24C16.
What parts are used alongside the 24C16?
The DS1307, L293D, 7805, LCD-jhd12864e-xl and LM1117 appear in the most repositories here.
Which microcontrollers do boards using the 24C16 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the 24C16?
The median is 180 × 106.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the 24C16?
By GitHub stars, Ultra DB X51 v1 by ExploreEmbedded, with 70 stars.
Can I simulate one of these boards using the 24C16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.