10 open source boards using the NCP551

Real designs built with the NCP551, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

The NCP551 in open source designs

The gallery holds 10 open source boards using the NCP551 from 4 GitHub repositories; a typical one measures about 77.7 × 63.3 mm and carries around 54 components.

90% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Rifle and sensors by DAlexis.

Parts used alongside the NCP551

Microcontrollers on boards using the NCP551

What boards using the NCP551 are built for

NCP551: common questions

Where can I find a NCP551 reference design?

Each of the 10 boards on this page is a real design using the NCP551. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NCP551 use?

Most are built on STM32 (5) and ESP32 (1).

How big is a typical board using the NCP551?

The median is 77.7 × 63.3 mm, and 90% are two-layer designs.

What is the most popular open source board using the NCP551?

By GitHub stars, Rifle and sensors by DAlexis, with 16 stars.

Can I simulate one of these boards using the NCP551 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part