HardLabs

HadesMicroJLC

david-who·HadesFCS·Hardware/HadesMicroJLCPCB/HadesMicroJLCPCB.kicad_pcb

HadesMicroJLC PCB layout, top view — open source board by david-who

About the HadesMicroJLC PCB

HadesMicroJLC is an open source PCB design by david-who, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 50 × 50 mm, with 76 components from 36 distinct parts.

Other key parts include the MPRLS0015PA0000SA, AP2112K-3.3, PCA9685PW, CAT24C256 and USBLC6-2SC6. By type, the board carries 30 capacitors, 17 resistors, 7 ICs, 7 diodes, 2 inductors and 1 fuse.

It belongs with the sensors designs in this gallery.

From the project

This folder contains all hardware design files for the HADES flight control system.

This folder contains all hardware design files for the HADES flight control system.

Hades: Dual STM32-based board containing microcontrollers (F4 and H7), inertial sensors, GPS receiver, power distribution system for servos (up to 9A at 5V). This is the main platform for testing. Hades Micro: 5cmx5cm flight control board with a single STM32F4. No GPS receiver and limited power distribution. Hades Micro (JLCPCB):* Nearly identical to Hades Micro, however uses SPI instead of I2C for sensor communication. Additionally, nearly all parts are available through LCSC/JLCPCB for assembly.

Main components on the HadesMicroJLC

MPRLS0015PA0000SAAP2112K-3.3PCA9685PWCAT24C256USBLC6-2SC6C5514CH340E

HadesMicroJLC bill of materials (BOM)

76 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MPRLS0015PA0000SA
IC1
1
AP2112K-3.3
U1
1
PCA9685PW
U2
1
CAT24C256
U3
1
USBLC6-2SC6
U4
1
C5514
74AHC1GU04GW,125
U5
1
CH340E
U6
2
TDD01H0SB1R
BOOT1, BOOT2
1
TLC-FSMD050
Fuse
F1
1
W25N01GVZEIG
W25N01GVZEIG_TR
FLASH1
1
ABM8-16.000MHZ-B2-T
16MHz
HSE1
1
Conn_01x04
I2C
1
BMX055
IMU1
1
Jumper_NO_Small
JP1
1
Conn_02x08_Odd_Even
PWM_PWR1
1
Conn_01x08
PWM_SIGNAL1
1
SKRPANE010
RESET1
1
TrmnlBlck
SERVO1
1
GR
PWR1
2
D_Schottky
D1, D6
Show 16 more
QtyPartRefs
1
GR
D2
1
RE
D3
2
BL
D4, D5
1
YE
D7
2
SDCL1005C10NJTDF
FB_Small
FB1, FB2
3
1u
C1, C2, C22
1
10U
10u
C3
21
100N
100n
C4, C5, C6, C7, C8, C9, C10, C11 +13
2
2U2
2u2
C14, C15
2
10P
10p
C20, C21
1
1n
C24
7
2K2
2k2
R1, R2, R6, R7, R8, R9, R15
3
1k
R3, R4, R5
1
470
620
R10
2
22
R11, R13
4
10K
10k
R12, R14, R16, R17

HadesMicroJLC design files

The KiCad project lives in the david-who/HadesFCS repository on GitHub; these links point at the commit this page was built from.

HadesMicroJLC: common questions

How big is the HadesMicroJLC PCB?

The HadesMicroJLC measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the HadesMicroJLC?

76 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HadesMicroJLC design files?

From the david-who/HadesFCS repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the HadesMicroJLC design in my own project?

Yes, under the terms of its BSD-3-Clause license, which david-who chose for the repository.

More boards in HadesFCS

Similar boards