HardLabs

Badge bsides v0.7

dodgymike·bsidescpt2016badge·badge-dc24/badge-bsides-v0.7.kicad_pcb

Badge bsides v0.7 PCB layout, top view — open source ESP8266 board by dodgymike

About the Badge bsides v0.7 PCB

Badge bsides v0.7 is an open source ESP8266 PCB design by dodgymike, published on GitHub. It is a 2-layer board measuring 99.6 × 57.9 mm, with 66 components from 31 distinct parts.

Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the TSOP38238, 74HC595, MC78L05ACH, 74LS165 and CH340H/T. By type, the board carries 22 resistors, 11 capacitors, 7 ICs, 5 inductors, 3 diodes and 2 connectors.

It belongs with the wearables designs in this gallery, and the repository also holds 1 earlier revision of it.

Main components on the Badge bsides v0.7

ESP-12ETSOP3823874HC595MC78L05ACH74LS165CH340H/TMCP73831

Badge bsides v0.7 bill of materials (BOM)

66 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP-12E
U1
1
TSOP38238
U2
1
74HC595
U3
1
MC78L05ACH
U4
1
74LS165
U5
1
CH340H/T
U6
1
MCP73831
U7
1
12 MHz Crystal
Y1
1
USB_OTG
P1
1
CONN_01X04
P2
10
SW_PUSH
BUTTON_L1, BUTTON_L2, BUTTON_L3, BUTTON_L4, BUTTON_L5, BUTTON_L6, BUTTON_L7, BUTTON_L8 +2
2
CONN_01X02
Power2, Program1
1
100 Ohm THERMISTOR
TH1
1
LEDs:LED-5MM
Infrared1
1
LED
Power1
1
Led_RGB_CA
D1
2
LED
D2, D3
2
LEDs:LED-5MM
L1, L5
3
LED
L2, L3, L4
2
10uF
C1, C10
Show 11 more
QtyPartRefs
3
1uF
C2, C3, C11
1
22 pF
C4
1
22pF
C5
1
0.1 uF
C6
1
1 uF
C7
2
4.7 uF
C8, C9
9
RC0805JR-07100RL
100
R1, R2, R3, R4, R5, R6, R7, R9 +1
8
RC0805JR-07100RL
100 Ohm
R8, R11, R12, R13, R16, R17, R18, R19
2
RC0805JR-07100RL
10k Ohm
R14, R15
2
470 Ohm
R20, R22
1
4k Ohm
R21

Badge bsides v0.7 design files

The KiCad project lives in the dodgymike/bsidescpt2016badge repository on GitHub; these links point at the commit this page was built from.

Badge bsides v0.7: common questions

What microcontroller does the Badge bsides v0.7 use?

The Badge bsides v0.7 is built around the ESP-12E, from the ESP8266 family.

How big is the Badge bsides v0.7 PCB?

The Badge bsides v0.7 measures 99.6 × 57.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Badge bsides v0.7?

66 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Badge bsides v0.7 design files?

From the dodgymike/bsidescpt2016badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Badge bsides v0.7 design in my own project?

The repository has no license, so all rights stay with dodgymike. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Badge bsides v0.7 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in bsidescpt2016badge

Earlier revisions in the repo: badge-bsides-v0.6

Similar boards