Badge dc24-with lcd all smd and breakout
About the Badge dc24-with lcd all smd and breakout
Badge dc24-with lcd all smd and breakout is an open source ESP8266 PCB design by dodgymike, published on GitHub. It is a 2-layer board measuring 87.3 × 43 mm, with 32 components from 17 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the TSOP38238, 74HC595 and MC78L05ACH. By type, the board carries 10 resistors, 5 inductors, 4 ICs, 3 capacitors, 2 connectors and 2 LEDs.
It belongs with the wearables, displays & leds and dev boards & breakouts designs in this gallery.
Main components on the Badge dc24-with lcd all smd and breakout
Badge dc24-with lcd all smd and breakout bill of materials (BOM)
32 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-12E | ESP-12E | U1 |
| 1 | TSOP38238 | IR_Receiver | U2 |
| 1 | 74HC595 | DIP-16_W7.62mm_LongPads | U3 |
| 1 | MC78L05ACH | MC78L05ACH-SOT89-3_Housing_Handsoldering | U4 |
| 1 | USB_OTG | USB_Micro-B | P1 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06 | P2 |
| 1 | CONN_01X08 | Pin_Header_Straight_1x08 | LCD1 |
| 2 | SW_PUSH | SW_SPST_B3S-1000 | PROGRAM1, RESET1 |
| 2 | CONN_01X02 | Pin_Header_Straight_1x02 | Power2, Program1 |
| 1 | LEDs:LED-5MM | LED_0805 | Infrared1 |
| 1 | LED | LED_0805 | Power1 |
| 1 | Led_RGB_CA | Pin_Header_Straight_1x04 | D1 |
| 2 | LEDs:LED-5MM | LED_0805 | L1, L5 |
| 3 | LED | LED_0805 | L2, L3, L4 |
| 1 | 10uF | C_0805_HandSoldering | C1 |
| 2 | 1uF | C_0805_HandSoldering | C2, C3 |
| 10 | RC0805JR-07100RL 100 | R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Badge dc24-with lcd all smd and breakout design files
The KiCad project lives in the dodgymike/bsidescpt2016badge repository on GitHub; these links point at the commit this page was built from.
Badge dc24-with lcd all smd and breakout: common questions
What microcontroller does the Badge dc24-with lcd all smd and breakout use?
The Badge dc24-with lcd all smd and breakout is built around the ESP-12E, from the ESP8266 family.
How big is the Badge dc24-with lcd all smd and breakout?
The Badge dc24-with lcd all smd and breakout measures 87.3 × 43 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Badge dc24-with lcd all smd and breakout?
32 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Badge dc24-with lcd all smd and breakout design files?
From the dodgymike/bsidescpt2016badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Badge dc24-with lcd all smd and breakout design in my own project?
The repository has no license, so all rights stay with dodgymike. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Badge dc24-with lcd all smd and breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in bsidescpt2016badge
ESP8266Paper badges
99.6 × 57.9 mm66 parts2LNo license0
ESP8266Badge bsides v0.7
99.6 × 57.9 mm66 parts2LNo license0
ESP8266Badge dc24-with lcd
82.2 × 49.4 mm31 parts2LNo license0
ESP8266Badge dc24-with lcd all smd
87.3 × 43 mm31 parts2LNo license0
ESP8266Badge dc24
62.2 × 46.4 mm22 parts2LNo license0
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398