HardLabs

Badge dc24-with lcd

dodgymike·bsidescpt2016badge·badge-dc24/badge-dc24-with-lcd.kicad_pcb

Badge dc24-with lcd PCB layout, top view — open source ESP8266 board by dodgymike

About the Badge dc24-with lcd PCB

Badge dc24-with lcd is an open source ESP8266 PCB design by dodgymike, published on GitHub. It is a 2-layer board measuring 82.2 × 49.4 mm, with 31 components from 16 distinct parts.

Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the TSOP38238, 74HC595, MC78L05ACH and ATMEGA32U4-M. By type, the board carries 10 resistors, 5 ICs, 5 inductors, 3 capacitors, 2 LEDs and 1 diode.

It belongs with the wearables and displays & leds designs in this gallery.

Main components on the Badge dc24-with lcd

ESP-12ETSOP3823874HC595MC78L05ACHATMEGA32U4-M

Badge dc24-with lcd bill of materials (BOM)

31 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP-12E
U1
1
TSOP38238
U2
1
74HC595
U3
1
MC78L05ACH
U4
1
ATMEGA32U4-M
U5
1
CONN_01X08
LCD1
2
SW_PUSH
PROGRAM1, RESET1
2
CONN_01X02
Power2, Program1
1
LEDs:LED-5MM
Infrared1
1
LED
Power1
1
Led_RGB_CA
D1
2
LEDs:LED-5MM
L1, L5
3
LED
L2, L3, L4
1
10uF
C1
2
1uF
C2, C3
10
RC0805JR-07100RL
100
R1, R2, R3, R4, R5, R6, R7, R8 +2

Badge dc24-with lcd design files

The KiCad project lives in the dodgymike/bsidescpt2016badge repository on GitHub; these links point at the commit this page was built from.

Badge dc24-with lcd: common questions

What microcontroller does the Badge dc24-with lcd use?

The Badge dc24-with lcd is built around the ESP-12E, from the ESP8266 family.

How big is the Badge dc24-with lcd PCB?

The Badge dc24-with lcd measures 82.2 × 49.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Badge dc24-with lcd?

31 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Badge dc24-with lcd design files?

From the dodgymike/bsidescpt2016badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Badge dc24-with lcd design in my own project?

The repository has no license, so all rights stay with dodgymike. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Badge dc24-with lcd without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in bsidescpt2016badge

Similar boards