HardLabs

Portapack havoc

emtee40·portapack-havoc·hardware/portapack_h1/portapack_h1.kicad_pcb

Portapack havoc PCB layout, top view — open source board by emtee40

About the Portapack havoc PCB

Portapack havoc is an open source PCB design by emtee40, published on GitHub under the GPL-2.0 license. It is a board measuring 120 × 75 mm, with 108 components from 53 distinct parts.

Other key parts include the AK4951EN, TCR2EF18,LM(CT, 5M40ZE64, CAT4004[_AB] and NUF4220MN. By type, the board carries 41 capacitors, 26 resistors, 9 connectors, 9 test points, 8 ICs and 4 inductors.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

PortaPack H1 is portability add-on hardware for the HackRF One software-defined radio (SDR).

PortaPack H1 is portability add-on hardware for the HackRF One software-defined radio (SDR).

The schematic was drawn using KiCad 4.0.6.

Schematic symbols are cached in the design files, but are also available in a separate repository:

https://github.com/sharebrained/library-kicad/

The circuit board was designed using KiCad.

PCB footprints are cached in the design files, but are also avaliable in a separate repository:

Main components on the Portapack havoc

AK4951ENTCR2EF18,LM(CT5M40ZE64CAT4004[_AB]NUF4220MNBQ24075RGT74HC1G04GWMAX-M8

Portapack havoc bill of materials (BOM)

108 components, 53 distinct parts.

QtyPartRefs
1
AK4951EN
U1
1
TCR2EF18,LM(CT
U2
1
5M40ZE64
U3
1
CAT4004[_AB]
U4
1
NUF4220MN
U5
1
BQ24075RGT
U6
1
74HC1G04GW
U7
1
MAX-M8
U8
1
10.00000M
X1
1
HEADER_1X3
J1
1
MICROSD_DETSW
J2
1
ER-TFT024-3_FPC
J3
1
HEADER_1X2
J4
1
CONN_COAX
P1
1
TRRS_SW_JACK
P2
1
HACKRF_ONE_P20
P20
1
HACKRF_ONE_P22
P22
1
HACKRF_ONE_P28
P28
1
BATTERY
BT1
4
HOLE1
H2, H3, H4, H5
Show 33 more
QtyPartRefs
1
ER-TFT024-3_PANEL
LCD1
1
220R
RP1
1
CK_TSWB-3N-CB
SW1
9
TP
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +1
1
LED 0603 green
D1
1
LED 0603 yellow
D2
3
FBEAD
FB1, FB2, FB3
1
27N
L1
1
1U
C1
14
100N
C2, C3, C4, C5, C9, C18, C20, C27 +6
4
2U2
C6, C8, C10, C12
13
10U
C7, C11, C13, C26, C32, C34, C36, C37 +5
2
1U
C14, C25
2
4U7
C15, C16
1
1N
C17
1
10N
C19
2
220N
C22, C23
1
R
C39
1
R
R1
1
10K
R2
2
1K5
R3, R5
1
1K91
R4
1
1K8
R6
3
0R
R7, R23, R24
8
10K
R8, R9, R10, R13, R14, R15, R16, R19
2
33R
R11, R12
1
1M
R17
1
2K2
R18
1
3K9
R20
1
100R
R21
1
33R
R22
1
100K
R25
1
10R
R26

Portapack havoc design files

The KiCad project lives in the emtee40/portapack-havoc repository on GitHub; these links point at the commit this page was built from.

Portapack havoc: common questions

How big is the Portapack havoc PCB?

The Portapack havoc measures 120 × 75 mm and is 1.6 mm thick.

How many components are on the Portapack havoc?

108 components, from 53 distinct parts. The full bill of materials is listed on this page.

Where can I download the Portapack havoc design files?

From the emtee40/portapack-havoc repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Portapack havoc design in my own project?

Yes, under the terms of its GPL-2.0 license, which emtee40 chose for the repository.

Similar boards