6 open source boards using the 74HC1G04GW
Real designs built with the 74HC1G04GW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Portapack havoc modified
jamesshao8
120 × 75 mm108 partsGPL-2.0186Portapack carnage
Acetolyne
120 × 75 mm108 partsGPL-2.046Havoc mayhem-177
zipper177
120 × 75 mm108 partsGPL-2.03Portapack havoc
emtee40
120 × 75 mm108 partsGPL-2.01Havoc
mksmiffy
120 × 75 mm108 partsGPL-2.01PortaPack H1
Josephrp
120 × 75 mm108 partsCustom license12
How designs wire the 74HC1G04GW
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC1G04GW connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 has a series resistor on 6 of 6 designs, most often 1 MΩ.
- Pin 4 has a series resistor on 6 of 6 designs, most often 1 MΩ (then 33 Ω).
- Pin 1 is left unconnected on 6 of 6 designs.
- Pin 2 has a series capacitor on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Not connected 100% | — |
| Pin 2 | Connected to: Signal 100% |
|
| Pin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Portapack havoc modified by jamesshao8, Portapack carnage by Acetolyne, PortaPack H1 by Josephrp and Havoc mayhem-177 by zipper177.
The 74HC1G04GW in open source designs
The gallery holds 6 open source boards using the 74HC1G04GW from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 108 components.
83% carry an open source license.
The most starred is Portapack havoc modified by jamesshao8.
Parts used alongside the 74HC1G04GW
What boards using the 74HC1G04GW are built for
74HC1G04GW: common questions
Where can I find a 74HC1G04GW reference design?
Each of the 6 boards on this page is a real design using the 74HC1G04GW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74HC1G04GW pin 2?
Pin 2 has a series resistor on 6 of 6 designs, most often 1 MΩ. Counted from the KiCad layouts of 6 open source designs using the 74HC1G04GW.
What resistor goes on the 74HC1G04GW pin 4?
Pin 4 has a series resistor on 6 of 6 designs, most often 1 MΩ (then 33 Ω). Counted from the KiCad layouts of 6 open source designs using the 74HC1G04GW.
How is the 74HC1G04GW pin 1 connected?
Pin 1 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74HC1G04GW.
What parts are used alongside the 74HC1G04GW?
The 5M40ZE64, AK4951EN, BQ24075RGT, CAT4004[_AB] and MAX-M8 appear in the most repositories here.
How big is a typical board using the 74HC1G04GW?
The median is 120 × 75 mm.
What is the most popular open source board using the 74HC1G04GW?
By GitHub stars, Portapack havoc modified by jamesshao8, with 186 stars.
Can I simulate one of these boards using the 74HC1G04GW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.