6 open source boards using the TCR2EF18,LM(CT
Real designs built with the TCR2EF18,LM(CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Portapack havoc modified
jamesshao8
120 × 75 mm108 partsGPL-2.0186Portapack carnage
Acetolyne
120 × 75 mm108 partsGPL-2.046Havoc mayhem-177
zipper177
120 × 75 mm108 partsGPL-2.03Portapack havoc
emtee40
120 × 75 mm108 partsGPL-2.01Havoc
mksmiffy
120 × 75 mm108 partsGPL-2.01PortaPack H1
Josephrp
120 × 75 mm108 partsCustom license12
How designs wire the TCR2EF18,LM(CT
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TCR2EF18,LM(CT connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to 3.3V on 6 of 6 designs.
- Pin 1 has a decoupling capacitor on 6 of 6 designs.
- Pin 2 is tied to GND on 6 of 6 designs.
- Pin 3 is tied to 3.3V on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 100% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: 3.3V 100% |
|
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: 1.8V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Portapack havoc modified by jamesshao8, Portapack carnage by Acetolyne, PortaPack H1 by Josephrp and Havoc mayhem-177 by zipper177.
The TCR2EF18,LM(CT in open source designs
The gallery holds 6 open source boards using the TCR2EF18,LM(CT from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 108 components.
83% carry an open source license.
The most starred is Portapack havoc modified by jamesshao8.
Parts used alongside the TCR2EF18,LM(CT
What boards using the TCR2EF18,LM(CT are built for
TCR2EF18,LM(CT: common questions
Where can I find a TCR2EF18,LM(CT reference design?
Each of the 6 boards on this page is a real design using the TCR2EF18,LM(CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TCR2EF18,LM(CT pin 1 connected?
Pin 1 is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TCR2EF18,LM(CT.
How is the TCR2EF18,LM(CT pin 2 connected?
Pin 2 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TCR2EF18,LM(CT.
How is the TCR2EF18,LM(CT pin 3 connected?
Pin 3 is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TCR2EF18,LM(CT.
What parts are used alongside the TCR2EF18,LM(CT?
The 5M40ZE64, 74HC1G04GW, AK4951EN, BQ24075RGT and CAT4004[_AB] appear in the most repositories here.
How big is a typical board using the TCR2EF18,LM(CT?
The median is 120 × 75 mm.
What is the most popular open source board using the TCR2EF18,LM(CT?
By GitHub stars, Portapack havoc modified by jamesshao8, with 186 stars.
Can I simulate one of these boards using the TCR2EF18,LM(CT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.