12 open source boards using the SIT1050T(SOIC-8_150mil)

Real designs built with the SIT1050T(SOIC-8_150mil), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

The SIT1050T(SOIC-8_150mil) in open source designs

The gallery holds 12 open source boards using the SIT1050T(SOIC-8_150mil) from 4 GitHub repositories; a typical one measures about 75.2 × 74.7 mm and carries around 157 components.

92% are two-layer designs, the rest use four layers or more, and 92% carry an open source license.

The most starred is ESP32-EVB Rev K1 by OLIMEX.

Microcontrollers on boards using the SIT1050T(SOIC-8_150mil)

What boards using the SIT1050T(SOIC-8_150mil) are built for

SIT1050T(SOIC-8_150mil): common questions

Where can I find a SIT1050T(SOIC-8_150mil) reference design?

Each of the 12 boards on this page is a real design using the SIT1050T(SOIC-8_150mil). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SIT1050T(SOIC-8_150mil)?

The BAT54C(SOT23-3), CH340X(MSOP-10), ESP32-WROOM-32E-N4, HX7027(SOT-23) and LAN8710A-EZC(QFN32) appear in the most repositories here.

Which microcontrollers do boards using the SIT1050T(SOIC-8_150mil) use?

Most are built on ESP32 (11) and STM32 (1).

How big is a typical board using the SIT1050T(SOIC-8_150mil)?

The median is 75.2 × 74.7 mm, and 92% are two-layer designs.

What is the most popular open source board using the SIT1050T(SOIC-8_150mil)?

By GitHub stars, ESP32-EVB Rev K1 by OLIMEX, with 287 stars.

Can I simulate one of these boards using the SIT1050T(SOIC-8_150mil) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part