Beehive-Monitoring
About the Beehive-Monitoring PCB
Beehive-Monitoring is an open source ESP32 PCB design by GhanmiIyed, published on GitHub. It is a 4-layer board measuring 40.1 × 60.5 mm, with 85 components from 51 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the TP4056, DW01A, TPS63020DSJR, W25Q128JVS and RAK4200. By type, the board carries 33 capacitors, 24 resistors, 9 ICs, 5 diodes, 4 inductors and 3 transistors.
Main components on the Beehive-Monitoring
Beehive-Monitoring bill of materials (BOM)
85 components, 51 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOP127P600X175-9N | U1 |
| 1 | DW01A | SOT-23-6 | U3 |
| 1 | TPS63020DSJR | IC_TPS63020DSJR | U4 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U6 |
| 1 | RAK4200 | RAK4200 | U7 |
| 1 | ESP32-S3 | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U12 |
| 1 | IM73D122 Infineon Technologies | Infineon_PG-LLGA-5-2 | U20 |
| 1 | BMI270 | XDCR_BMI270 | U21 |
| 1 | BME280 | PSON65P250X250X100-8N | U22 |
| 1 | AO3401A | SOT-23 | Q1 |
| 2 | 2N7002 | SOT-23 | Q2, Q3 |
| 1 | 40MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Battery IN | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | J2 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | Antenna_Shield | Texas_SWRA117D_2.4GHz_Left | AE2 |
| 2 | SW_Push | SW_SPST_FSMSM | SW1, SW2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_0603_1608Metric | D2 |
| 1 | P6SMB6.8CA/TR13 | D_SMA_Handsoldering | D3 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LED | LED_0603_1608Metric | D4, D5 |
| 1 | 24nH | L_0402_1005Metric | L1 |
| 1 | 1.5uH | L_Coilcraft_XxL4020 | L2 |
| 1 | 2nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 2.6nH | L_0201_0603Metric | L5 |
| 2 | 1.5pF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C2 |
| 6 | 10uF | C_0402_1005Metric | C3, C6, C7, C14, C44, C51 |
| 1 | 10uF | C_0805_2012Metric | C8 |
| 1 | 100nF | C_0603_1608Metric | C9 |
| 13 | 100nF | C_0402_1005Metric | C11, C16, C17, C21, C23, C25, C45, C47 +5 |
| 2 | 1uF | C_0402_1005Metric | C15, C18 |
| 1 | 10nF | C_0402_1005Metric | C19 |
| 2 | 14pF | C_0402_1005Metric | C20, C24 |
| 1 | 1u | C_0402_1005Metric | C22 |
| 1 | 0.1u | C_0402_1005Metric | C26 |
| 3 | 22uF | C_0603_1608Metric | C29, C30, C31 |
| 1 | 0.4Ω | R_0402_1005Metric | R1 |
| 1 | 220K | R_0402_1005Metric | R2 |
| 5 | 1k | R_0402_1005Metric | R3, R11, R21, R23, R24 |
| 2 | 1M | R_0402_1005Metric | R4, R18 |
| 3 | 10KΩ | R_0402_1005Metric | R5, R7, R8 |
| 1 | 499Ω | R_0402_1005Metric | R6 |
| 2 | 1KΩ | R_0402_1005Metric | R9, R10 |
| 1 | 1.5K | R_0402_1005Metric | R12 |
| 1 | 180K | R_0402_1005Metric | R13 |
| 1 | 100k | R_0402_1005Metric | R14 |
| 1 | 150K | R_0402_1005Metric | R15 |
| 2 | 5.1K | R_0402_1005Metric | R17, R20 |
| 1 | 100 | R_0402_1005Metric | R22 |
| 1 | 100KΩ | R_0402_1005Metric | R25 |
| 1 | 100Ω | R_0402_1005Metric | R83 |
Beehive-Monitoring design files
The KiCad project lives in the GhanmiIyed/Beehive-Monitoring repository on GitHub; these links point at the commit this page was built from.
- LayoutNew folder/HIVES360.kicad_pcb
- SchematicNew folder/HIVES360.kicad_sch
Beehive-Monitoring: common questions
What microcontroller does the Beehive-Monitoring use?
The Beehive-Monitoring is built around the ESP32-S3, from the ESP32 family.
How big is the Beehive-Monitoring PCB?
The Beehive-Monitoring measures 40.1 × 60.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Beehive-Monitoring?
85 components, from 51 distinct parts. The full bill of materials is listed on this page.
Where can I download the Beehive-Monitoring design files?
From the GhanmiIyed/Beehive-Monitoring repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Beehive-Monitoring design in my own project?
The repository has no license, so all rights stay with GhanmiIyed. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Beehive-Monitoring without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k