Mouse

GKevinLi·mouse·pcb/mous.kicad_pcb

Mouse PCB layout, top view — open source Nordic nRF board by GKevinLi

About the Mouse PCB

Mouse is an open source Nordic nRF PCB design by GKevinLi, published on GitHub. It is a 4-layer board measuring 45 × 62.7 mm, with 68 components from 38 distinct parts.

Its main chip is the NRF52833_QDXX, from the Nordic nRF family. Other key parts include the LM66200DRLR, PMW3610, TLV76718DRVX, USBLC6-2P6 and DW01A. By type, the board carries 33 capacitors, 10 resistors, 8 ICs, 7 switches, 4 inductors and 2 connectors.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

custom mouse

This is the README for the project's PCB and KiCad files. Relevant information and known issues will be documented here. An update will be coming soon to fix the current issues.

I am planning on creating a second iteration of this PCB with some new features: - Upgrade to nRF52840 chip - Potential better mouse sensor - Integrated battery charging IC - LEDs - Move ON/OFF switch to bottom for easier accessibility

Mouse, from the project README
From the project README

Main components on the Mouse

Mouse bill of materials (BOM)

68 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM66200DRLR
IC2
1
PMW3610
U1
1
TLV76718DRVX
TLV76718DRVx
U2
1
USBLC6-2P6
U4
1
DW01A
U5
1
TP4056-42-ESOP8
U6
1
XC6206PXXXMR
XC6206PxxxMR
U7
1
NRF52833_QDXX
nRF52833_QDxx
U8
1
FS8205
Q1
1
CRYSTAL_GND24
Crystal_GND24
Y2
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J3
5
SW_SPDT_312
SW1, SW2, SW4, SW6, SW7
1
SW_SPDT
SW5
1
SW_Push
SW8
2
LED
D4, D5
1
10UH
10uH
L1
1
15NH
15nH
L2
1
4.7NH
4.7nH
L3
1
2.2NH
2.2nH
L4
Show 18 more
QtyPartRefs
2
10NF
10nf
C1, C3
3
10UF
10uf
C2, C33, C34
8
100NF
100nf
C4, C5, C6, C11, C12, C19, C27, C28
1
3.3UF
3.3uf
C7
8
1UF
1uf
C8, C9, C10, C16, C25, C26, C30, C31
3
4.7UF
4.7uf
C13, C14, C15
1
47NF
47nf
C17
1
820PF
820pf
C18
1
100PF
100pf
C20
1
1PF
1pf
C21
1
1.2PF
1.2pf
C22
2
12PF
12pf
C23, C24
1
2.2UF
2.2uf
C32
3
10K
10k
R1, R8, R29
1
100
R3
3
1k
R4, R9, R10
2
5K1
5k1
R5, R6
1
5.1K
5.1k
R11

Mouse design files

The KiCad project lives in the GKevinLi/mouse repository on GitHub; these links point at the commit this page was built from.

Mouse: common questions

What microcontroller does the Mouse use?

The Mouse is built around the NRF52833_QDXX, from the Nordic nRF family.

How big is the Mouse PCB?

The Mouse measures 45 × 62.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Mouse?

68 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mouse design files?

From the GKevinLi/mouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mouse design in my own project?

The repository has no license, so all rights stay with GKevinLi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mouse without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards