The-Real-Watch

JHPate1·The-Real-Watch·PCB/THE REAL WATCH.kicad_pcb

The-Real-Watch PCB layout, top view — open source ESP32 board by JHPate1

About the The-Real-Watch PCB

The-Real-Watch is an open source ESP32 PCB design by JHPate1, published on GitHub. It is a 2-layer board measuring 37.5 × 37.5 mm, with 48 components from 26 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the MAX30102, BME680, TP4056-42-ESOP8, AP2112K-3.3 and MAX98357A. By type, the board carries 15 resistors, 13 capacitors, 10 ICs, 5 connectors, 2 transistors and 2 switches.

It belongs with the iot & wireless, wearables and power & battery designs in this gallery.

From the project

A watch that ACTUALLY tracks your health by monitoring your surroundings and constantly looking for active threats.

Let me start from the drawing board. I've noticed EXPENSIVE Garmin, Apple and Fitbits that don't even do their real job. Like for example, your health isn't just your BPM, O2 and Pedometer levels. It's more than that. My watch includes ALL those AND a environmental sensor, because the real influencing force is the environment you're in, not how much you walk. This watch constantly scans for CO2, Gas, Noise, Pressure, Noise levels and more! This watch is also capable of running APPs that runs via bluetooth and wifi. It can be used to communicate with other watches eg; if you're hiking and your…

The-Real-Watch, from the project README
From the project README

Main components on the The-Real-Watch

The-Real-Watch bill of materials (BOM)

48 components, 26 distinct parts.

QtyPartRefs
1
ESP32-S3-MINI-1
U1
1
MAX30102
U2
1
BME680
U3
1
TP4056-42-ESOP8
U5
1
AP2112K-3.3
U6
1
MAX98357A
U7
1
DRV2605LDGS
U8
1
LC709203FQH-01TWG
U9
1
AP2112K-1.8
U10
1
BNO085
U11
1
BSS84
Q1
1
2N7002
Q2
3
Conn_01x02_Pin
J1, J2, J3
1
Conn_01x13_Pin
J4
1
USB_C_Plug_USB2.0
P1
1
SPH0641LU4H-1
MK1
1
SW_Push
SW1
1
SW_Push
SW2
9
0.1uF
C1, C4, C6, C7, C9, C10, C12, C13 +1
3
1uF
C2, C3, C5
Show 6 more
QtyPartRefs
1
10uF
C8
1
5.1k
R1
1
1.2k
R2
10
4.7K
R3, R4, R5, R6, R7, R10, R11, R12 +2
1
100k
R8
2
10K
R9, R15

The-Real-Watch design files

The KiCad project lives in the JHPate1/The-Real-Watch repository on GitHub; these links point at the commit this page was built from.

The-Real-Watch: common questions

What microcontroller does the The-Real-Watch use?

The The-Real-Watch is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the The-Real-Watch PCB?

The The-Real-Watch measures 37.5 × 37.5 mm, has 2 copper layers and is 1.580794 mm thick.

How many components are on the The-Real-Watch?

48 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the The-Real-Watch design files?

From the JHPate1/The-Real-Watch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the The-Real-Watch design in my own project?

The repository has no license, so all rights stay with JHPate1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the The-Real-Watch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards