11 open source boards using the LC709203FQH-01TWG

Real designs built with the LC709203FQH-01TWG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LC709203FQH-01TWG

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LC709203FQH-01TWG connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 7 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 7 of 7 designs, most often 4.7 kΩ (then 10 kΩ).
  • The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 100 nF).
  • The TEST pin is tied to GND on 7 of 7 designs.
TESTpin 1Connected to: GND 100%
VSSpin 2Connected to: GND 100%
VDDpin 3Connected to: V_BAT 71% · a signal 29%
  • Decoupling capacitor on 86% · 1 µF (5), 100 nF (2), 22 µF (1)
TSWpin 5Connected to: Not connected 86%
TSENSEpin 6Connected to: Not connected 71% · a signal 29%
SDApin 7Connected to: The microcontroller 100%, ADS1015IDGS 29%
  • Pull-up to 3.3V on 100% · 4.7 kΩ (5), 10 kΩ (3), 470 kΩ (1)
SCLpin 8Connected to: The microcontroller 100%, ADS1015IDGS 29%
  • Pull-up to 3.3V on 100% · 4.7 kΩ (5), 10 kΩ (4)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB-Modular-Multi-Protocol-Hub by MbFredys, 12 class notes by bob4o-afk, Watch2 by atctwo and Defcon sstv badge by livitup.

The LC709203FQH-01TWG in open source designs

The gallery holds 11 open source boards using the LC709203FQH-01TWG from 7 GitHub repositories; a typical one measures about 79.7 × 58.6 mm and carries around 131 components.

75% use four copper layers or more, and 64% carry an open source license.

The most starred is PCB-Modular-Multi-Protocol-Hub by MbFredys.

Parts used alongside the LC709203FQH-01TWG

Microcontrollers on boards using the LC709203FQH-01TWG

LC709203FQH-01TWG: common questions

Where can I find a LC709203FQH-01TWG reference design?

Each of the 11 boards on this page is a real design using the LC709203FQH-01TWG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the LC709203FQH-01TWG SDA pin?

The SDA pin has a pull-up to 3.3V on 7 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the LC709203FQH-01TWG.

What pull-up resistor is used on the LC709203FQH-01TWG SCL pin?

The SCL pin has a pull-up to 3.3V on 7 of 7 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the LC709203FQH-01TWG.

What decoupling capacitors do designs use on the LC709203FQH-01TWG VDD pin?

The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the LC709203FQH-01TWG.

What parts are used alongside the LC709203FQH-01TWG?

The ADS1015IDGS, MAX30102 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the LC709203FQH-01TWG use?

Most are built on ESP32 (8) and RP2040/RP2350 (3).

How big is a typical board using the LC709203FQH-01TWG?

The median is 79.7 × 58.6 mm, and 25% are two-layer designs.

What is the most popular open source board using the LC709203FQH-01TWG?

By GitHub stars, PCB-Modular-Multi-Protocol-Hub by MbFredys, with 7 stars.

Can I simulate one of these boards using the LC709203FQH-01TWG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part