Kids timer
jnd-cz·kids-timer
About the Kids timer PCB
Kids timer is an open source Raspberry Pi PCB design by jnd-cz, published on GitHub. It is a 2-layer board measuring 150 × 150 mm, with 266 components from 62 distinct parts.
Its main chip is the RP2354A, from the Raspberry Pi family. Other key parts include the SRV05-4-P-T7, BQ24073RGTR, DW01A, TPS63031DSKR and VEML6030. By type, the board carries 127 diodes, 49 capacitors, 47 resistors, 19 ICs, 8 switches and 5 transistors.
It belongs with the power & battery and displays & leds designs in this gallery.
From the project
LED timer for kids, hardware design mainly by Claude Opus 5.5, software by ChatGPT 6.1 Terra
Rev 1 PCB design and a MicroPython countdown timer for the RP2354A. The firmware supports a seven-segment countdown, minute and second LED rings, ambient-light brightness, audio and songs, battery and sensor readouts, a level, and a touch pad test.
- Firmware installation, features and controls - Board bring-up and GPIO map - Display power estimate and measurement plan - Production files for Rev 1
Main components on the Kids timer
Kids timer bill of materials (BOM)
266 components, 62 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRV05-4-P-T7 SRV05-4 | SOT-23-6 | U1 |
| 1 | BQ24073RGTR BQ24073RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | DW01A | SOT-23-6 | U3 |
| 1 | TPS63031DSKR TPS63031DSK | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U4 |
| 1 | RP2354A | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U5 |
| 1 | VEML6030 | Vishay_VEML6030_2x2mm | U6 |
| 1 | STK8328-C | LGA-12_2x2mm_P0.5mm | U7 |
| 1 | RMC20452T | RaspberryPi_RM2_14.5x16.5mm | U8 |
| 1 | PAM8302AASCR PAM8302AAS | MSOP-8_3x3mm_P0.65mm | U9 |
| 10 | SM16206S | QSOP-24_3.9x8.7mm_P0.635mm | U10, U11, U12, U13, U14, U15, U16, U17 +2 |
| 2 | AO3401A | SOT-23 | Q1, Q4 |
| 1 | HJ8205 | SOT-23-6 | Q2 |
| 2 | 2N7002 | SOT-23 | Q3, Q5 |
| 1 | X322512MSB4SI 12MHz 20pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | S2B-PH-SM4-TB(LF)(SN) LiPo JST-PH | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | S2B-PH-SM4-TB(LF)(SN) SPEAKER | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | MLT-8530 | Buzzer_HNDZ_MLT-8530_8.5x8.5mm | BZ1 |
| 4 | GS8011AW-G | GS8011_SMD_16.8x28mm | DS1, DS2, DS3, DS4 |
| 1 | MSK12C02G15-B MSK12C02 | SW_SPDT_MSK12C02_EdgeNotch | SW1 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS-1088-AR02016 BOOTSEL | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW2 |
| 1 | TS-1088-AR02016 RESET | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW3 |
| 1 | TS-1088-AR02016 BTN1 | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW4 |
| 1 | TS-1088-AR02016 BTN2 | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW5 |
| 1 | TS-1088-AR02016 BTN3 | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW6 |
| 1 | TS-1088-AR02016 BTN4 | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW7 |
| 1 | TS-1088-AR02016 BTN5 | SW_SPST_XUNPU_TS-1088_3.9x3mm | SW8 |
| 1 | KT-0603R CHG | LED_0603_1608Metric | D1 |
| 60 | KT-0805G GREEN | LED_0805_2012Metric_Ring | D100, D101, D102, D103, D104, D105, D106, D107 +52 |
| 4 | KT-0805Y YELLOW | LED_0805_2012Metric | D160, D161, D162, D163 |
| 60 | C84256 RED | LED_0805_2012Metric_Ring | D200, D201, D202, D203, D204, D205, D206, D207 +52 |
| 2 | C34499 WHITE | LED_0805_2012Metric | D300, D301 |
| 1 | WPN252012H1R5MT 1.5uH | L_1008_2520Metric | L1 |
| 1 | YSMC201612H-3R3MB 3.3uH | L_Changjiang_FTC201612S | L2 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C1 |
| 8 | 10UF 10uF | C_0805_2012Metric | C2, C3, C5, C7, C8, C43, C63, C70 |
| 3 | 100NF 100nF | C_0603_1608Metric | C4, C6, C9 |
| 27 | 100NF 100nF | C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17 +19 |
| 4 | 4.7UF 4.7uF | C_0402_1005Metric | C21, C22, C23, C52 |
| 2 | 0402CG330J500NT 33pF | C_0402_1005Metric | C24, C25 |
| 3 | 22UF 22uF | C_0805_2012Metric | C34, C40, C44 |
| 1 | 4.7NF 4.7nF | C_0402_1005Metric | C60 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 1k | R_0603_1608Metric | R3, R12 |
| 1 | 1.2K 1.2k | R_0603_1608Metric | R4 |
| 1 | 10K 10k | R_0603_1608Metric | R5 |
| 4 | 100K 100k | R_0603_1608Metric | R6, R7, R8, R10 |
| 1 | 1.5K 1.5k | R_0603_1608Metric | R9 |
| 1 | 100 | R_0603_1608Metric | R11 |
| 1 | 1M | R_0603_1608Metric | R13 |
| 2 | 220K 220k | R_0603_1608Metric | R14, R15 |
| 3 | 33 | R_0402_1005Metric | R16, R22, R73 |
| 2 | 1k | R_0402_1005Metric | R17, R20 |
| 2 | 27 | R_0603_1608Metric | R18, R19 |
| 3 | 10K 10k | R_0402_1005Metric | R21, R50, R72 |
| 8 | 3.3K 3.3k | R_0402_1005Metric | R30, R31, R32, R33, R34, R35, R36, R37 |
| 2 | 2k | R_0402_1005Metric | R38, R39 |
| 4 | 100K 100k | R_0402_1005Metric | R40, R41, R63, R70 |
| 3 | 4.7K 4.7k | R_0402_1005Metric | R51, R52, R60 |
| 2 | 1M | R_0402_1005Metric | R53, R54 |
| 2 | 47K 47k | R_0402_1005Metric | R61, R62 |
| 1 | 470 | R_0402_1005Metric | R71 |
Kids timer design files
The KiCad project lives in the jnd-cz/kids-timer repository on GitHub; these links point at the commit this page was built from.
- Layoutkids-timer.kicad_pcb
- Schematickids-timer.kicad_sch
- BOMproduction/bom.csv
Kids timer: common questions
What microcontroller does the Kids timer use?
The Kids timer is built around the RP2354A, from the Raspberry Pi family.
How big is the Kids timer PCB?
The Kids timer measures 150 × 150 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kids timer?
266 components, from 62 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kids timer design files?
From the jnd-cz/kids-timer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kids timer design in my own project?
The repository has no license, so all rights stay with jnd-cz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kids timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507