6 open source boards using the VEML6030
Real designs built with the VEML6030, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
PCB CANNONBALL
user-will
25.6 × 23.6 mm58 parts4LNo license14ESP32
Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.03Raspberry Pi
Kids timer
jnd-cz
150 × 150 mm266 parts2LNo license0Iot tag cad design
ocean-monitoring-gateway
20.7 × 37.5 mm92 partsNo license0ESP32
Kompic Mk1
porupski
44.5 × 50.6 mm119 parts4LGPL-3.03Button board r2
picafe
91.9 × 12.4 mm10 parts4LNo license0
How designs wire the VEML6030
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the VEML6030 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_6 pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
- The SDA_2 pin has a pull-up to 3.3V on 3 of 4 designs, most often 10 kΩ (then 5.1 kΩ).
- The SCL_5 pin has a pull-up to 3.3V on 3 of 4 designs, most often 10 kΩ (then 5.1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 100% | — |
| SDA_2pin 2 | Connected to: The microcontroller 50% |
|
| SCL_5pin 5 | Connected to: The microcontroller 50% |
|
| VDD_6pin 6 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB CANNONBALL by user-will, Kompic Mk1 by porupski, Kids timer by jnd-cz and Iot tag cad design by ocean-monitoring-gateway.
The VEML6030 in open source designs
The gallery holds 6 open source boards using the VEML6030 from 5 GitHub repositories; a typical one measures about 44.5 × 44.1 mm and carries around 106 components.
80% use four copper layers or more, and 33% carry an open source license.
The most starred is PCB CANNONBALL by user-will.
Parts used alongside the VEML6030
Microcontrollers on boards using the VEML6030
What boards using the VEML6030 are built for
VEML6030: common questions
Where can I find a VEML6030 reference design?
Each of the 6 boards on this page is a real design using the VEML6030. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the VEML6030 VDD_6 pin?
The VDD_6 pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the VEML6030.
What pull-up resistor is used on the VEML6030 SDA_2 pin?
The SDA_2 pin has a pull-up to 3.3V on 3 of 4 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the VEML6030.
What pull-up resistor is used on the VEML6030 SCL_5 pin?
The SCL_5 pin has a pull-up to 3.3V on 3 of 4 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the VEML6030.
Which microcontrollers do boards using the VEML6030 use?
Most are built on ESP32 (3) and Raspberry Pi (1).
How big is a typical board using the VEML6030?
The median is 44.5 × 44.1 mm, and 20% are two-layer designs.
What is the most popular open source board using the VEML6030?
By GitHub stars, PCB CANNONBALL by user-will, with 14 stars.
Can I simulate one of these boards using the VEML6030 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.