20 open source boards using the SRV05-4-P-T7

Real designs built with the SRV05-4-P-T7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the SRV05-4-P-T7

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SRV05-4-P-T7 connects to, and the resistors, capacitors and other passives placed on it.

  • The VN pin is tied to GND on 14 of 14 designs.
  • The IO1 pin has a series resistor on 6 of 14 designs, most often 27 Ω (then 10 kΩ).
  • The IO4 pin has a series resistor on 6 of 14 designs, most often 27 Ω (then 10 kΩ).
IO1pin 1Connected to: A connector 57%, the microcontroller 21%
  • Series resistor on 43% · 27 Ω (2), 10 kΩ (1), 100 kΩ (1)
VNpin 2Connected to: GND 100%
IO2pin 3Connected to: A connector 43% · not connected 29%
  • Series resistor on 36% · 27 Ω (2), 10 kΩ (1), 100 kΩ (1)
VPpin 5Connected to: VBUS 86%
IO4pin 6Connected to: A connector 50% · not connected 21%
  • Series resistor on 43% · 27 Ω (1), 10 kΩ (1), 100 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NuBusFPGA by MelkhiorVintageComputing, OTTO-Beta-Main by bitfieldaudio, Hellen1-vr discrete by andreika-git and CloudSmoker by cwgstreet.

The SRV05-4-P-T7 in open source designs

The gallery holds 20 open source boards using the SRV05-4-P-T7 from 14 GitHub repositories; a typical one measures about 100 × 80.3 mm and carries around 114 components.

67% use four copper layers or more, and 25% carry an open source license.

The most starred is NuBusFPGA by MelkhiorVintageComputing.

Parts used alongside the SRV05-4-P-T7

Microcontrollers on boards using the SRV05-4-P-T7

SRV05-4-P-T7: common questions

Where can I find a SRV05-4-P-T7 reference design?

Each of the 20 boards on this page is a real design using the SRV05-4-P-T7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SRV05-4-P-T7 VN pin connected?

The VN pin is tied to GND on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the SRV05-4-P-T7.

What resistor goes on the SRV05-4-P-T7 IO1 pin?

The IO1 pin has a series resistor on 6 of 14 designs, most often 27 Ω (then 10 kΩ). Counted from the KiCad layouts of 14 open source designs using the SRV05-4-P-T7.

What resistor goes on the SRV05-4-P-T7 IO4 pin?

The IO4 pin has a series resistor on 6 of 14 designs, most often 27 Ω (then 10 kΩ). Counted from the KiCad layouts of 14 open source designs using the SRV05-4-P-T7.

What parts are used alongside the SRV05-4-P-T7?

The MAX17048G+T10, RMC20452T and SN74LV1T125DBVR appear in the most repositories here.

Which microcontrollers do boards using the SRV05-4-P-T7 use?

Most are built on ESP32 (3), AVR/Arduino (2), RP2040/RP2350 (2) and STM32 (2).

How big is a typical board using the SRV05-4-P-T7?

The median is 100 × 80.3 mm, and 33% are two-layer designs.

What is the most popular open source board using the SRV05-4-P-T7?

By GitHub stars, NuBusFPGA by MelkhiorVintageComputing, with 62 stars.

Can I simulate one of these boards using the SRV05-4-P-T7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part