JWatch
JujuXu·JWatch·KiCad_JWatch/KiCad_JWatch.kicad_sch
About the JWatch PCB
JWatch is an open source ESP32 PCB design by JujuXu, published on GitHub. It is a board, with 61 components from 29 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the BMP390, BH1750FVI-TR, MAX32664GWEA+T, MAX30101EFD+T and TPS22916CNYFPT. By type, the board carries 20 capacitors, 18 resistors, 14 ICs, 3 connectors, 2 diodes and 1 module.
It belongs with the iot & wireless, wearables and displays & leds designs in this gallery.
From the project
This project focuses on creating a compact, waterproof digital smartwatch that combines wireless connectivity (Bluetooth & Wi-Fi) with a variety of smart features. Designed as a bracelet-style wearable, the smartwatch will feature an OLED or e-paper display, RFID functionality fo
This project focuses on creating a compact, waterproof digital smartwatch that combines wireless connectivity (Bluetooth & Wi-Fi) with a variety of smart features. Designed as a bracelet-style wearable, the smartwatch will feature an OLED or e-paper display, RFID functionality for access control, health monitoring sensors, and seamless integration with iOS devices.
Main components on the JWatch
JWatch bill of materials (BOM)
61 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP390 | BMP390 | IC1 |
| 1 | BH1750FVI-TR | WSOF6 | IC2 |
| 1 | MAX32664GWEA+T | BGA16C35P4X4_157X155X69 | IC3 |
| 1 | MAX30101EFD+T | 14-LEAD-OESIP | IC4 |
| 5 | TPS22916CNYFPT | BGA4C40P2X2_78X78X50 | IC5, IC6, IC7, IC8, IC9 |
| 2 | PCA9306 | U1, U5 | |
| 1 | RV-3028-C7 | MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U2 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | Motor_DC | M1 | |
| 1 | MMBT2222A | SOT-23 | Q1 |
| 1 | 32.768kHz 6pF | Y1 | |
| 1 | Conn_01x04_Pin | J1 | |
| 2 | Conn_01x07_Pin | J2, J3 | |
| 1 | SLLB510200 | SLLB510200 | S1 |
| 2 | D_Schottky | D1, D2 | |
| 1 | 0.22F | C1 | |
| 10 | 100nF | C2, C3, C4, C6, C7, C8, C13, C14 +2 | |
| 3 | 1u | C5, C11, C15 | |
| 2 | 4.7u | C9, C10 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100n | C12 | |
| 1 | 22u | C16 | |
| 2 | 8.2p | C17, C18 | |
| 3 | 1k | R1, R4, R18 | |
| 4 | 4.7k | R2, R3, R5, R6 | |
| 1 | 10 | R7 | |
| 2 | 200k | R8, R15 | |
| 4 | 2.2k | R9, R10, R11, R12 | |
| 4 | 10k | R13, R14, R16, R17 |
JWatch design files
The KiCad project lives in the JujuXu/JWatch repository on GitHub; these links point at the commit this page was built from.
- SchematicKiCad_JWatch/KiCad_JWatch.kicad_sch
JWatch: common questions
What microcontroller does the JWatch use?
The JWatch is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How many components are on the JWatch?
61 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the JWatch design files?
From the JujuXu/JWatch repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the JWatch design in my own project?
The repository has no license, so all rights stay with JujuXu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the JWatch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k