Ereader
katetriestocode·ereader·ereader/ereader.kicad_sch
About the Ereader PCB
Ereader is an open source ESP32 PCB design by katetriestocode, published on GitHub. It is a board, with 41 components from 28 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MPU-6050, BQ24075RGT, DS3231MZ, USBLC6-2SC6 and AP2112K-3.3. By type, the board carries 13 resistors, 10 capacitors, 8 ICs, 4 connectors, 2 transistors and 2 switches.
Main components on the Ereader
Ereader bill of materials (BOM)
41 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1U | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | BQ24075RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U3 |
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | AP2112K-3.3 | SOT-23-5 | U6 |
| 1 | MCP73831-2-MC | SOT-23-5 | U7 |
| 1 | DW01A | SOT-23-6 | U8 |
| 1 | FS8205A | SOT-23-6 | Q1 |
| 1 | AO3407A | SOT95P280X125-3N | Q2 |
| 1 | Micro_SD_Card_Det1 | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | reset | SW_TH_Tactile_Omron_B3F-100x | SW1 |
| 1 | boot | SW_TH_Tactile_Omron_B3F-100x | SW2 |
| 1 | BAT54C | SOT-23 | D2 |
| 1 | LED | LED_1210_3225Metric | D3 |
| 5 | 0.1uF | C_0402_1005Metric | C1, C3, C4, C7, C8 |
| 3 | 1uF | C_0402_1005Metric | C2, C10, C11 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_0603_1608Metric | C5 |
| 1 | 2.2nF | C_0402_1005Metric | C6 |
| 1 | 100 | R_0402_1005Metric | R1 |
| 1 | 1k | R_0402_1005Metric | R2 |
| 2 | 5.1k | R_0402_1005Metric | R3, R4 |
| 5 | 10k | R_0402_1005Metric | R6, R7, R11, R12, R13 |
| 2 | 4.7k | R_0402_1005Metric | R8, R9 |
| 2 | 2k | R_0402_1005Metric | R10, R14 |
Ereader design files
The KiCad project lives in the katetriestocode/ereader repository on GitHub; these links point at the commit this page was built from.
- Schematicereader/ereader.kicad_sch
Ereader: common questions
What microcontroller does the Ereader use?
The Ereader is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How many components are on the Ereader?
41 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ereader design files?
From the katetriestocode/ereader repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Ereader design in my own project?
The repository has no license, so all rights stay with katetriestocode. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ereader without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k