12 open source boards using the SPV1040T
Real designs built with the SPV1040T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Pecanpico9
DL7AD
29.8 × 33.7 mm112 parts2LGPL-3.068STM32
Pecanpico10
DL7AD
23 × 50 mm119 parts2LCustom license41Nordic nRF
MeshtasticStick
Oliver0804
31.1 × 94.2 mm79 parts2LNo license8Power Board
CMUAbstract
45 × 45 mm72 parts4LNo license5STM32
Plant monitor
PimentoFr
50 × 74 mm168 parts4LNo license0RP2040/RP2350
Pico-HABakuk
serych
52 × 51.3 mm78 parts2LCERN-OHL-W-2.00Sb sca
starbelt
50 × 50 mm30 parts4LCC-BY-SA-4.00Pass through board
Kmshanley
40 × 40 mm43 parts4LGPL-3.03PassthroughBoardRev0 B
Kmshanley
40 × 40 mm43 parts4LGPL-3.03PassthroughBoardRev0 C
Kmshanley
40 × 40 mm43 parts4LGPL-3.03TopExternalFaceRev1
Kmshanley
50 × 50 mm28 parts4LGPL-3.03ExternalFaces
Kmshanley
47.8 × 47.8 mm26 parts8LGPL-3.03
How designs wire the SPV1040T
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SPV1040T connects to, and the resistors, capacitors and other passives placed on it.
- The MPPT-SET pin has a capacitor to GND on 8 of 8 designs, most often 100 nF (then 22 µF).
- The LX pin has a inductor on 8 of 8 designs, most often 10 µH (then 15 µH).
- The VOUT pin has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 4.7 µF).
- The VCTRL pin has a resistor to GND on 8 of 8 designs, most often 100 kΩ (then 820 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MPPT-SETpin 1 | Connected to: Signal 75% · SOL 25% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| LXpin 3 | Connected to: Signal 100% |
|
| VOUTpin 4 | Connected to: Signal 88% |
|
| VCTRLpin 5 | Connected to: Signal 100% |
|
| ICTRL_MINUSpin 6 | Connected to: Signal 75% · GND 25% |
|
| ICTRL_PLUSpin 7 | Connected to: Signal 75% · GND 25% |
|
| XSHUTpin 8 | Connected to: Signal 88% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pecanpico9 by DL7AD, Pecanpico10 by DL7AD, MeshtasticStick by Oliver0804 and Power Board by CMUAbstract.
The SPV1040T in open source designs
The gallery holds 12 open source boards using the SPV1040T from 8 GitHub repositories; a typical one measures about 42.5 × 48.9 mm and carries around 58 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Pecanpico9 by DL7AD.
Parts used alongside the SPV1040T
Microcontrollers on boards using the SPV1040T
What boards using the SPV1040T are built for
SPV1040T: common questions
Where can I find a SPV1040T reference design?
Each of the 12 boards on this page is a real design using the SPV1040T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SPV1040T MPPT-SET pin connected?
The MPPT-SET pin has a capacitor to GND on 8 of 8 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 8 open source designs using the SPV1040T.
How is the SPV1040T LX pin connected?
The LX pin has a inductor on 8 of 8 designs, most often 10 µH (then 15 µH). Counted from the KiCad layouts of 8 open source designs using the SPV1040T.
How is the SPV1040T VOUT pin connected?
The VOUT pin has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the SPV1040T.
What parts are used alongside the SPV1040T?
The ADP322ACPZ-115-R7, BME280, PAC1720-1-AIA-TR and TPS62260DRVR appear in the most repositories here.
Which microcontrollers do boards using the SPV1040T use?
Most are built on STM32 (3), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the SPV1040T?
The median is 42.5 × 48.9 mm, and 33% are two-layer designs.
What is the most popular open source board using the SPV1040T?
By GitHub stars, Pecanpico9 by DL7AD, with 68 stars.
Can I simulate one of these boards using the SPV1040T before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.